TMS570LS0914_17 Datasheet, PDF (114/163 Pages) Texas Instruments – 16- and 32-Bit RISC Flash Microcontroller

TMS570LS0914
SPNS225D – JUNE 2013 – REVISED NOVEMBER 2016
www.ti.com
Table 7-22. Control Bit to SOC Output
CONTROL BIT
PINMMR35[0]
PINMMR35[8]
PINMMR35[16]
PINMMR35[24]
PINMMR36[0]
PINMMR36[8]
PINMMR36[16]
SOC OUTPUT
SOC1A_SEL
SOC2A_SEL
SOC3A_SEL
SOC4A_SEL
SOC5A_SEL
SOC6A_SEL
SOC7A_SEL
The SOCA output from each ePWM module is connected to a "switch" shown in Figure 7-10. This switch
is implemented by using the control registers in the PINMMR module. Figure 7-11 shows an example of
the implementation for the switch on SOC1A. The switches on the other SOCA signals are implemented in
the same way.
ePWM1
0
0
SOC1A
1
EPWM1SOCA
PINMMR164[0]
0
0
1
From switch on
SOC2A
when PINMMR164[8] = 1
From switch on
SOC2A
when PINMMR164[8] = 0
Figure 7-11. ePWM1SOC1A Switch Implementation
The logic equations ( Equation 1, Equation 2, Equation 3, and Equation 4) for the four outputs from the
combinational logic shown in Figure 7-10 are:
ePWM_B = SOC1B or SOC2B or SOC3B or SOC4B or SOC5B or SOC6B or SOC7B
(1)
ePWM_A1 = [ SOC1A and not(SOC1A_SEL) ] or [ SOC2A and not(SOC2A_SEL) ] or [ SOC3A and not(SOC3A_SEL) ] or
[ SOC4A and not(SOC4A_SEL) ] or [ SOC5A and not(SOC5A_SEL) ] or [ SOC6A and not(SOC6A_SEL) ] or
[ SOC7A and not(SOC7A_SEL) ]
(2)
ePWM_A2 = [ SOC1A and SOC1A_SEL ] or [ SOC2A and SOC2A_SEL ] or [ SOC3A and SOC3A_SEL ] or
[ SOC4A and SOC4A_SEL ] or [ SOC5A and SOC5A_SEL ] or [ SOC6A and SOC6A_SEL ] or
[ SOC7A and SOC7A_SEL ]
(3)
ePWM_AB = ePWM_B or ePWM_A2
(4)
114 Peripheral Information and Electrical Specifications
Copyright © 2013–2016, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: TMS570LS0914