SBOU087A Datasheet, PDF (10/35 Pages) Texas Instruments – Multi-Cal-System Evaluation Module

Starter System Setup
www.ti.com
2.2 Multi-Cal-System Hardware Setup for Recommended Starter Kit
Figure 8 shows how to connect the Multi-Cal-Master board to the USB DAQ Platform board. The best (and
easiest) way to connect the two components is to gently push on both sides of the DSUB connectors.
Make sure that the two connectors are completely pushed together; loose connections may cause
intermittent EVM operation.
Figure 8. Connect Multi-Cal-Master PCA to USB DAQ Platform
10
Multi-Cal-System Evaluation Module
SBOU087A – August 2010 – Revised April 2011
Copyright © 2010–2011, Texas Instruments Incorporated
Submit Documentation Feedback