English
Language : 

LPV521_16 Datasheet, PDF (1/34 Pages) Texas Instruments – NanoPower, 1.8-V, RRIO, CMOS Input, Operational Amplifier
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
LPV521
SNOSB14D – AUGUST 2009 – REVISED DECEMBER 2014
LPV521 NanoPower, 1.8-V, RRIO, CMOS Input, Operational Amplifier
1 Features
•1 For VS = 5 V, Typical Unless Otherwise Noted
– Supply Current at VCM = 0.3 V 400 nA (Max)
– Operating Voltage Range 1.6 V to 5.5 V
– Low TCVOS 3.5 µV/°C (Max)
– VOS 1 mV (Max)
– Input Bias Current 40 fA
– PSRR 109 dB
– CMRR 102 dB
– Open-Loop Gain 132 dB
– Gain Bandwidth Product 6.2 kHz
– Slew Rate 2.4 V/ms
– Input Voltage Noise at f = 100 Hz 255 nV/√Hz
– Temperature Range −40°C to 125°C
2 Applications
• Wireless Remote Sensors
• Powerline Monitoring
• Power Meters
• Battery Powered Industrial Sensors
• Micropower Oxygen sensor and Gas Sensor
• Active RFID Readers
• Zigbee Based Sensors for HVAC Control
• Sensor Network Powered by Energy Scavenging
3 Description
The LPV521 is a single nanopower 552-nW amplifier
designed for ultra long life battery applications. The
operating voltage range of 1.6 V to 5.5 V coupled
with typically 351 nA of supply current make it well
suited for RFID readers and remote sensor
nanopower applications. The device has input
common mode voltage 0.1 V over the rails,
guaranteed TCVOS and voltage swing to the rail
output performance. The LPV521 has a carefully
designed CMOS input stage that outperforms
competitors with typically 40 fA IBIAS currents. This
low input current significantly reduces IBIAS and IOS
errors introduced in megohm resistance, high
impedance photodiode, and charge sense situations.
The LPV521 is a member of the PowerWise™ family
and has an exceptional power-to-performance ratio.
The wide input common mode voltage range,
guaranteed 1 mV VOS and 3.5 µV/°C TCVOS enables
accurate and stable measurement for both high-side
and low-side current sensing.
EMI protection was designed into the device to
reduce sensitivity to unwanted RF signals from cell
phones or other RFID readers.
The LPV521 is offered in the 5-pin SC70 package.
Device Information(1)
PART NUMBER PACKAGE
BODY SIZE (NOM)
LPV521
SC70 (5)
2.00 mm x 1.25 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
Nanopower Supply Current
125°C
800
700
85°C
600
500
400
300
25°C
200
100
-40°C
0
VCM = VS ± 0.3V
1
2
3
4
5
6
SUPPLY VOLTAGE (V)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.