LMC6492 Datasheet, PDF (1/28 Pages) National Semiconductor (TI) – CMOS Rail-to-Rail Input and Output Operational Amplifier

LMC6492, LMC6494
www.ti.com
SNOS724D – AUGUST 2000 – REVISED MARCH 2013
LMC6492 Dual/LMC6494 Quad CMOS Rail-to-Rail Input and Output Operational Amplifier
Check for Samples: LMC6492, LMC6494
FEATURES
1
2(Typical Unless Otherwise Noted)
• Rail-to-Rail Input Common-Mode Voltage
Range, Ensured Over Temperature
• Rail-to-Rail Output Swing within 20 mV of
Supply Rail, 100 kΩ Load
• Operates from 5V to 15V Supply
• Excellent CMRR and PSRR 82 dB
• Ultra Low Input Current 150 fA
• High Voltage Gain (R_L = 100 kΩ) 120 dB
• Low Supply Current (@ V_S = 5V) 500
μA/Amplifier
• Low Offset Voltage Drift 1.0 μV/°C
APPLICATIONS
• Automotive Transducer Amplifier
• Pressure Sensor
• Oxygen Sensor
• Temperature Sensor
• Speed Sensor
DESCRIPTION
The LMC6492/LMC6494 amplifiers were specifically
developed for single supply applications that operate
from −40°C to +125°C. This feature is well-suited for
automotive systems because of the wide temperature
range. A unique design topology enables the
LMC6492/LMC6494 common-mode voltage range to
accommodate input signals beyond the rails. This
eliminates non-linear output errors due to input
signals exceeding a traditionally limited common-
mode voltage range. The LMC6492/LMC6494 signal
range has a high CMRR of 82 dB for excellent
accuracy in non-inverting circuit configurations.
The LMC6492/LMC6494 rail-to-rail input is
complemented by rail-to-rail output swing. This
assures maximum dynamic signal range which is
particularly important in 5V systems.
Ultra-low input current of 150 fA and 120 dB open
loop gain provide high accuracy and direct interfacing
with high impedance sources.
Connection Diagram
Figure 1. 8-Pin PDIP/SOIC - Top View
Figure 2. 14-Pin PDIP/SOIC - Top View
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2000–2013, Texas Instruments Incorporated