LMC6482-MIL Datasheet, PDF (1/31 Pages) Texas Instruments – CMOS Dual Rail-to-Rail Input and Output Operational Amplifier

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
LMC6482-MIL
SNOSD61 – JUNE 2017
LMC6482-MIL CMOS Dual Rail-to-Rail Input and Output Operational Amplifier
1 Features
•1 Typical Unless Otherwise Noted
• Rail-to-Rail Input Common-Mode Voltage Range
(Ensured Over Temperature)
• Rail-to-Rail Output Swing (Within 20-mV of Supply
Rail, 100-kΩ Load)
• Ensured 3-V, 5-V, and 15-V Performance
• Excellent CMRR and PSRR: 82 dB
• Ultralow Input Current: 20 fA
• High Voltage Gain (R L = 500 k Ω): 130 dB
• Specified for 2-kΩ and 600-Ω Loads
• Power-Good Output
• Available in VSSOP Package
2 Applications
• Data Acquisition Systems
• Transducer Amplifiers
• Hand-held Analytic Instruments
• Medical Instrumentation
• Active Filter, Peak Detector, Sample and Hold, pH
Meter, Current Source
• Improved Replacement for TLC272, TLC277
3 Description
The LMC6482-MIL device provides a common-mode
range that extends to both supply rails. This rail-to-rail
performance combined with excellent accuracy, due
to a high CMRR, makes it unique among rail-to-rail
input amplifiers. The device is ideal for systems, such
as data acquisition, that require a large input signal
range. The LMC6482-MIL is also an excellent
upgrade for circuits using limited common-mode
range amplifiers such as the TLC272 and TLC277.
Maximum dynamic signal range is assured in low
voltage and single supply systems by the rail-to-rail
output swing of the LMC6482-MIL. The rail-to-rail
output swing is ensured for loads down to 600 Ω of
the device. Ensured low-voltage characteristics and
low-power dissipation make the LMC6482-MIL
especially well-suited for battery-operated systems.
LMC6482-MIL is also available in a VSSOP package,
which is almost half the size of a SOIC-8 device. See
the LMC6484 data sheet for a quad CMOS
operational amplifier with these same features.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOIC (8)
4.90 mm × 3.91 mm
LMC6482-MIL
VSSOP (8)
3.00 mm × 3.00 mm
PDIP (8)
9.81 mm × 6.35 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Rail-to-Rail Input
Rail-to-Rail Output
A1 ±0.18 V
3V
A2 ±0.18 V
3V
0V
500mV
50 s
C001
0V
500mV
50 s
C002
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.