DS91M125_13 Datasheet, PDF (1/17 Pages) Texas Instruments – 125 MHz 1:4 M-LVDS Repeater with LVDS Input

DS91M125
www.ti.com
SNLS290C – AUGUST 2008 – REVISED APRIL 2013
DS91M125 125 MHz 1:4 M-LVDS Repeater with LVDS Input
Check for Samples: DS91M125
FEATURES
1
•2 DC - 125 MHz / 250 Mbps Low Jitter, Low
Skew, Low Power Operation
• Independent Driver Enable Pins
• Outputs Conform to TIA/EIA-899 M-LVDS
Standard
• Controlled Transition Times Minimize
Reflections
• Inputs Conform to TIA/EIA-644-A LVDS
Standard
• 8 kV ESD on M-LVDS Output Pins Protects
Adjoining Components
• Flow-Through Pinout Simplifies PCB Layout
• Industrial Operating Temperature Range
(−40°C to +85°C)
• Available in a Space Saving SOIC-16 Package
APPLICATIONS
• Multidrop / Multipoint Clock and Data
Distribution
• High-Speed, Low Power, Short-Reach
Alternative to TIA/EIA-485/422
• Clock Distribution in AdvancedTCA (ATCA)
and MicroTCA (μTCA, uTCA) Backplanes
DESCRIPTION
The DS91M125 is a 1:4 M-LVDS repeater designed
for driving and distributing clock or data signals to up
to four multipoint networks.
M-LVDS (Multipoint LVDS) is a new family of bus
interface devices based on LVDS technology
specifically designed for multipoint and multidrop
cable and backplane applications. It differs from
standard LVDS in providing increased drive current to
handle double terminations that are required in multi-
point applications. Controlled transition times
minimize reflections that are common in multipoint
configurations due to unterminated stubs.
A single DS91M125 channel is a 1:4 repeater that
accepts M-LVDS/LVDS/CML/LVPECL signals and
converts them to M-LVDS signal levels. Each output
has an associated independent driver enable pin. The
DS91M125 input conforms to the LVDS standard.
The DS91M125 has a flow-through pinout for easy
PCB layout. It provides a new alternative for high
speed multipoint interface applications. It is packaged
in a space saving SOIC-16 package.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated