English
Language : 

DRV5023_16 Datasheet, PDF (1/28 Pages) Texas Instruments – Digital-Switch Hall Effect Sensor
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DRV5023
SLIS151E – MAY 2014 – REVISED FEBRUARY 2016
DRV5023 Digital-Switch Hall Effect Sensor
1 Features
•1 Digital Unipolar-Switch Hall Sensor
• Superior Temperature Stability
– Sensitivity ±10% Over Temperature
• Multiple Sensitivity Options (BOP / BRP):
– 3.5 / 2 mT (FA, see Figure 23)
– 6.9 / 3.2 mT (AJ, see Figure 23)
– 14.5 / 6 mT (BI, see Figure 23)
• Supports a Wide Voltage Range
– 2.5 to 38 V
– No External Regulator Required
• Wide Operating Temperature Range
– TA = –40 to 125°C (Q, see Figure 23)
• Open Drain Output (30-mA Sink)
• Fast 35-µs Power-On Time
• Small Package and Footprint
– Surface Mount 3-Pin SOT-23 (DBZ)
– 2.92 mm × 2.37 mm
– Through-Hole 3-Pin TO-92 (LPG)
– 4.00 mm × 3.15 mm
• Protection Features
– Reverse Supply Protection (up to –22 V)
– Supports up to 40-V Load Dump
– Output Short-Circuit Protection
– Output Current Limitation
Output State
OUT
Bhys
2 Applications
• Docking Detection
• Door Open and Close Detection
• Proximity Sensing
• Valve Positioning
• Pulse Counting
3 Description
The DRV5023 device is a chopper-stabilized Hall
Effect Sensor that offers a magnetic sensing solution
with superior sensitivity stability over temperature and
integrated protection features.
When the applied magnetic flux density exceeds the
BOP threshold, the DRV5023 open-drain output goes
low. The output stays low until the field decreases to
less than BRP, and then the output goes to high
impedance. The output current sink capability is 30
mA. A wide operating voltage range from 2.5 to 38 V
with reverse polarity protection up to –22 V makes
the device suitable for a wide range of industrial
applications.
Internal protection functions are provided for reverse
supply conditions, load dump, and output short circuit
or over current.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DRV5023
SOT-23 (3)
TO-92 (3)
2.92 mm × 1.30 mm
4.00 mm × 3.15 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
SOT-23
TO-92
BRP
BOF
BOP
B (mT)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.