DLP9000_016 Datasheet, PDF (1/59 Pages) Texas Instruments – Family of 0.9 WQXGA Type A DMDs

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DLP9000
DLPS036B – SEPTEMBER 2014 – REVISED OCTOBER 2016
DLP9000 Family of 0.9 WQXGA Type A DMDs
1 Features
•1 High Resolution 2560×1600 (WQXGA) Array
– > 4 Million Micromirrors
– 7.56-µm Micromirror Pitch
– 0.9-Inch Micromirror Array Diagonal
– ±12° Micromirror Tilt Angle (Relative to Flat
State)
– Designed for Corner Illumination
– Integrated Micromirror Driver Circuitry
– Two High Speed Options
• DLP9000X With a Single DLPC910 Digital
Controller
– 480 MHz Input Data Clock Rate
– Up to 61 Giga-Bits Per Second (with
Continuous Streaming Input Data)
– Up to 14989 Hz (1-Bit Binary Patterns)
– Up to 1873 Hz (8-Bit Gray Patterns With
Illumination Modulation)
• DLP9000 with Dual DLPC900 Digital Controllers
– 400 MHz Input Data Clock Rate
– Up to 38 Giga-Bits per Second (With Up to 400
Pre-Stored Binary Patterns)
– Up to 9523 Hz (1-Bit Binary Patterns)
– Up to 1031 Hz (8-Bit Gray Patterns Pre-
Loaded With Illumination Modulation), External
Input Up to 360 Hz
• Designed for Use With Broad Wavelength Range
– 400 nm to 700 nm
– Window Transmission 95% (Single Pass,
Through Two Window Surfaces)
– Micromirror Reflectivity 88%
– Array Diffraction Efficiency 86%
– Array Fill Factor 92%
2 Applications
• Industrial
– Machine Vision and Quality Control
– 3D Printing
– Direct Imaging Lithography
– Laser Marking and Repair
• Medical
– Ophthalmology
– 3D Scanners for Limb and Skin Measurement
– Hyper-Spectral Imaging
– Hyper-Spectral Scanning
• Displays
– 3D Imaging Microscopes
– Intelligent and Adaptive Lighting
3 Description
Featuring over 4 million micromirrors, the high
resolution DLP9000 and DLP9000X digital
micromirror devices (DMDs) are spatial light
modulators (SLMs) that modulate the amplitude,
direction, and/or phase of incoming light. This
advanced light control technology has numerous
applications in the industrial, medical, and consumer
markets. The streaming nature of the DLP9000X and
its DLPC910 controller enable very high speed
continuous data streaming for lithographic
applications. Both DMDs enable large build sizes and
fine resolution for 3D printing applications. The high
resolution provides the direct benefit of scanning
larger objects for 3D machine vision applications.
Device Information⁽¹⁾
PART NUMBER PACKAGE
BODY SIZE (NOM)
DLP9000
DLP9000X
CLGA (355)
42.20 mm x 42.20 mm x
7.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
SPACE
Typical DLP9000X Application
LVDS Interface
Row and Block Signals
Control Signals
Status Signals
JTAG(3:0)
DLPR910 PGM(4:0)
DLPC910
Illumination
Driver
Illumination
Sensor
LVD Interface
RESET Signals
SCP Interface
DLP9000XFLS
CTRL_RSTZ
I2C
OSC
50 MHz
VLED0
VLED1
Power Management
Typical DLP9000 Application
PCLK, DE
HSYNC, VSYNC
24-bit RGB Data
USB
I²C
Flash
DLPC900
Red,Green,Blue PWM
LED Strobes
FAN
LED0
LED1
DMD CTL, DATA
LED
Driver
OSC
24-bit RGB Data
Flash
I²C SCP
SCP
DMD DATA
DLPC900
LED0
LED1
Voltage
Supplies
DLP9000FLS
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.