TLC5602C_15 Datasheet, PDF (9/14 Pages) Texas Instruments – VIDEO 8-BIT DIGITAL-TO-ANALOG CONVERTERS

PACKAGE OPTION ADDENDUM
www.ti.com
10-Jun-2014
PACKAGING INFORMATION
Orderable Device
TLC5602CDW
TLC5602CDWG4
TLC5602CDWR
TLC5602CN
Status Package Type Package Pins Package Eco Plan
(1)
Drawing
Qty
(2)
ACTIVE
SOIC
DW 20
25 Green (RoHS
& no Sb/Br)
ACTIVE
SOIC
DW 20
25 Green (RoHS
& no Sb/Br)
ACTIVE
SOIC
DW 20 2000 Green (RoHS
& no Sb/Br)
OBSOLETE PDIP
N
18
TBD
Lead/Ball Finish
(6)
CU NIPDAU
CU NIPDAU
CU NIPDAU
Call TI
MSL Peak Temp Op Temp (°C)
(3)
Level-1-260C-UNLIM
0 to 70
Level-1-260C-UNLIM
0 to 70
Level-1-260C-UNLIM
0 to 70
Call TI
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Device Marking
(4/5)
TLC5602C
TLC5602C
TLC5602C
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability}
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) _{MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.}
(4) _{There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.}
(5) _{Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation}
of the previous line and the two combined represent the entire Device Marking for that device.
(6) _{Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish}
value exceeds the maximum column width.
Samples
Addendum-Page 1