English
Language : 

TLC5602C_15 Datasheet, PDF (3/14 Pages) Texas Instruments – VIDEO 8-BIT DIGITAL-TO-ANALOG CONVERTERS
TLC5602C, TLC5602M
VIDEO 8-BIT DIGITAL-TO-ANALOG CONVERTERS
schematics of equivalent input and output
SLAS023D – FEBRUARY 1989 – REVISED JANUARY 2002
EQUIVALENT OF EACH DIGITAL INPUT
DGTL VDD
DGTL VDD
EQUIVALENT OF ANALOG OUTPUT
ANLG VDD1
80 Ω
A OUT
Dn
ÎÎÎÎ
ANLG‡
GND
DGTL‡
GND
ANLG‡
GND
‡ ANLG GND and DGTL GND do not connect internally and should be tied together as close to the device terminals as possible.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, ANLG VDD, DGTL VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Digital input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Analog reference voltage range, Vref . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VDD – 1.7 V to VDD + 0.5 V
Operating free-air temperature range, TA: TLC5602C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
TLC5602M . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
recommended operating conditions
Supply voltage, VDD
Analog reference voltage, Vref
High-level input voltage, VIH
Low-level input voltage, VIL
Pulse duration, CLK high or low, tw
Setup time, data before CLK↑, tsu
Hold time, data after CLK↑, th
Phase compensation capacitance, Ccomp (see Note 1)
Load resistance, RL
Operating free-air temperature,TA
TLC5602C
TLC5602M
NOTE 1: The phase compensation capacitor should be connected between COMP and ANLG GND.
MIN NOM MAX UNIT
4.75
5 5.25 V
3.8
4 4.2 V
2
V
0.8 V
25
ns
16.5
ns
12.5
ns
1
µF
75
Ω
0
70
°C
– 55
125
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3