English
Language : 

TC25SPD Datasheet, PDF (9/19 Pages) Texas Instruments – 680 X 500 PIXEL CCD IMAGE SENSOR
TC253SPD
680ā×ā500 PIXEL CCD IMAGE SENSOR
SOCS062B – JANUARY 2001 – REVISED MAY 2002
absolute maximum ratings over operating free-air temperature (unless otherwise noted)†
Supply voltage range, VSS: ADB (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SUB to SUB + 15 V
Supply voltage range, VSS: ODB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SUB to SUB + 22 V
Input voltage range, VI: IAG1, IAG2, SAG, SRG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10 V to 10 V
Input voltage range, VI: IAG1, SAG, SRG2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –8 V to 8 V
Input voltage range, VI: SRG1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –5 V to 8 V
Input voltage range, VI: CMG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –5 V to 15 V
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10°C to 45°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30°C to 85°C
Operating case temperature range, TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10°C to 55°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to SUB.
recommended operating conditions
Substrate bias, VSS
ADB
Supply voltage, VDD
ODB
For blooming control
For clearing
For transfer
IAG1
High
Low
IAG2
High
Low
SAG1
High
Low
Input voltage, VI†
SAG2
High
Low
SRG1
High
Low
SRG2
High
Low
CMG
High
Low
IAG1, IAG2
Clock frequency, fclock
SAG1, SAG2
SRG1, SRG2
CMG
Load capacitance
OUT
Operating free-air temperature, TA
† Fine tuning of input voltages is required in order to obtain good charge transfer.
MIN NOM
0
12
6
13
5.5
2.4
–3.2
4.5
–6.2
2.4
–2.4
3.1
–4.2
4.2
–4.6
5.7
–3.4
7 13.6
–2
3.125
3.125
12.5
12.5
–10
MAX
6
45
UNIT
V
V
V
MHz
pF
°C
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
9