AM3505_15 Datasheet, PDF (80/223 Pages) Texas Instruments – AM3517, AM3505 Sitara™ Processors

AM3517, AM3505
SPRS550F – OCTOBER 2009 – REVISED JULY 2014
www.ti.com
5 Specifications
5.1 Absolute Maximum Ratings
Table 5-1 specifies the absolute maximum ratings over the operating junction temperature range of
commercial and extended temperature devices. Stresses beyond those listed under absolute maximum
ratings may cause permanent damage to the device. These are stress ratings only and functional
operation of the device at these or any other conditions beyond those indicated under recommended
operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods
may affect device reliability.
Notes:
• Logic functions and parameter values are not assured out of the range specified in the recommended
operating conditions.
Table 5-1. Absolute Maximum Ratings Over Operating Junction Temperature Range
PARAMETER
MIN
MAX
VDD_CORE
Supply voltage range for core macros
-0.5
1.6
VDDS
Second supply voltage range for 1.8-V I/O macros
-0.5
2.25
VDDSHV
Supply voltage range for 1.8/3.3V I/O macros
-0.5
3.8
VDDS_SRAM_MPU
Analog Supply voltage range for 1.8-V MPU SLDO
-0.5
2.25
VDDS_SRAM_CORE_BG
Analog Supply voltage range for 1.8-V Core SLDO and
-0.5
2.25
VDDA of BandGap
VDDS_DPLL_MPU_USBHOST Analog power supply for 1.8-V MPUSS DPLL and
USBHOST DPLL
-0.5
2.1
VDDS_DPLL_PER_CORE
Analog power supply for 1.8-V DPLL and HSDIVIDER/
-0.5
2.1
CORE and HSDIVIDER
VDDA_DAC
Analog Power Supply for 1.8-V DAC
-0.5
2.43
VDDA3P3V_USBPHY
Analog power supply for 3.3-V USB transceiver
-0.5
3.6
VDDA1P8V_USBPHY
Power Supply for 1.8-V USB transceiver
-0.5
2.0
VDDSOSC
Power Supply for 1.8-V oscillator
-0.5
2.1
Oscillator input (sys_xtalin)
-0.3
VDDSOSC + 0.3
VDDS 1.8-V I/O macros
-0.3
VDDS + 0.3
V_PAD
Dual-voltage LVCMOS inputs, VDDSHV
-0.3
= 1.8 V
Voltage range at
PAD
Dual-voltage LVCMOS inputs, VDDSHV
-0.3
= 3.3 V
VDDSHV + 0.3
3.8
USB VBUS pin (usb0_vbus)
5.5
I_IOI
I_clamp
USB 5V Tolerant IOs (usb0_dp,
usb0_dm, usb0_id)
Current-pulse injection on each I/O pin⁽¹⁾
Clamp current for an input or output
5.25
200
-20
20
(1) Each device is tested with I/O pin injection of 200 mA with a stress voltage of 1.5 times maximum vdd at room temperature.
UNIT
V
V
V
V
V
V
V
V
V
V
V
V
mA
mA
80
Specifications
Copyright © 2009–2014, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: AM3517 AM3505