SN74AUP1G17 Datasheet, PDF (7/16 Pages) Texas Instruments – LOW - POWER SINGLE SCHMITT-TRIGGLER BUFFER

SN74AUP1G17
LOWĆPOWER SINGLE SCHMITTĆTRIGGER BUFFER
SCES579C – JUNE 2004 – REVISED NOVEMBER 2005
PARAMETER MEASUREMENT INFORMATION
(Propagation Delays, Setup and Hold Times, and Pulse Width)
From Output
Under Test
CL
(see Note A)
1 MΩ
LOAD CIRCUIT
VCC = 0.8 V
VCC = 1.2 V
± 0.1 V
VCC = 1.5 V
± 0.1 V
VCC = 1.8 V
± 0.15 V
VCC = 2.5 V
± 0.2 V
VCC = 3.3 V
± 0.3 V
CL 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF
V_M
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
VI
VCC
VCC
VCC
VCC
VCC
VCC
Input
VI
VM
VM
0V
tPLH
Output
VM
tPHL
VOH
VM
VOL
tPHL
tPLH
Output
VOH
VM
VM
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Input
Timing Input
Data Input
tw
VCC/2
VCC/2
VOLTAGE WAVEFORMS
PULSE DURATION
VCC
0V
VCC/2
VCC
0V
tsu
th
VCC/2
VCC/2
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VCC
0V
NOTES: A. CL includes probe and jig capacitance.
B. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr/tf = 3 ns.
C. The outputs are measured one at a time, with one transition per measurement.
D. tPLH and tPHL are the same as tpd.
E. All parameters and waveforms are not applicable to all devices.
Figure 3. Load Circuit and Voltage Waveforms
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
7