OPA2614ID Datasheet, PDF (6/34 Pages) Texas Instruments – Dual, High Gain Bandwidth, High Output Current Operational Amplifier with Current Limit

OPA2614
SBOS305D − JUNE 2004 − REVISED AUGUST 2008
www.ti.com
ELECTRICAL CHARACTERISTICS: V_S = +5V (continued)
Boldface limits are tested at +25°C.
R_F = 402Ω, R_L = 100Ω, and G = +2, unless otherwise noted. See Figure 3 for AC performance only.
OPA2614ID
PARAMETER
Power Supply
Specified Operating Voltage
Maximum Operating Voltage Range
Maximum Quiescent Current
Minimum Quiescent Current
Power-Supply Rejection Ratio (−PSRR)
Thermal Characteristics
Specified Operating Range D Package
Thermal Resistance, q_JA
D
SO-8
TEST CONDITIONS
V_S = +5V, both channels
V_S = +5V, both channels
Input-Referred
Junction-to-Ambient
TYP
+25°C
MIN/MAX OVER TEMPERATURE
0°C to −40°C to
+25°C⁽¹⁾ +70°C⁽²⁾ +85°C⁽²⁾ UNITS
TEST
MIN/ LEVELS
MAX
(3)
5
V
typ
C
12.6
12.6
12.6
V
max
A
10.5
11.0
11.3
11.5
mA
max
A
10.5
9.4
9.4
9.1
mA
min
A
95
dB
typ
C
−40 to +85
125
°C
typ
C
°C/W typ
C
(1) _{Junction temperature = ambient for +25°C tested specifications.}
(2) _{Junction temperature = ambient at low temperature limit; junction temperature = ambient +23°C at high temperature limit for over temperature}
tested specifications.
(3) _{Test levels: (A) 100% tested at +25°C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and}
simulation. (C) Typical value only for information.
(4) _{Current is considered positive-out-of-node. VCM is the input common-mode voltage.}
(5) _{Tested < 3dB below minimum CMRR specification at ± CMIR limits.}
6