LMH1251MT-NOPB Datasheet, PDF (6/19 Pages) Texas Instruments – YPBPR Path: 70 MHz, −3 dB, 700 mVPP Bandwidth

LMH1251
SNLS193J – AUGUST 2005 – REVISED MARCH 2013
www.ti.com
System Interface Signal Characteristics
Unless otherwise noted: _TA = 25°C, V_CC = +5.0V, Y Video_IN = 0.7 V_PP, P_BP_R Video_IN = ±350 mV, C_L = 8 pF, Video Outputs =
0.7 V_PP.
Symbol
Parameter
Conditions
Min ⁽¹⁾ Typ ⁽²⁾ Max ⁽¹⁾ Units
V_IL
Logic Low Input Voltage
(Pins 24, 23, 22, 21)
−0.5
1.5
V
V_IH
Logic High Input Voltage
(Pins 24, 23, 22, 21)
3.0
V_CC +0.5
V
I_L
Logic Low Input Current
Input Voltage = 0.4V
(Pins 24, 23, 22, 21)
±10
µA
I_H
Logic High Input Current
Input Voltage = 0.4V
(Pins 24, 23, 22, 21)
±10
µA
V_OL
Logic Low Output Voltage
I_O = 3 mA
(Pins 24, 23, 22, 21)
0.5
V
(1) Datasheet min/max specification limits are specified by design, test, or statistical analysis. The ensured specifications apply only for the
test conditions listed. Some performance characteristics may change when the device is not operated under the listed test conditions.
(2) Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary
over time and will also depend on the application and configuration. The typical values are not tested and are not ensured on shipped
production material.
6
Submit Documentation Feedback
Product Folder Links: LMH1251
Copyright © 2005–2013, Texas Instruments Incorporated