LMH1251MT-NOPB Datasheet, PDF (3/19 Pages) Texas Instruments – YPBPR Path: 70 MHz, −3 dB, 700 mVPP Bandwidth

LMH1251
www.ti.com
SNLS193J – AUGUST 2005 – REVISED MARCH 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings ^(1)(2)(3)
ESD Tolerance
Supply Voltage V_CC, Pins 7 and 17
Voltage at any Input Pin (V_IN)
Video Inputs (pk-pk)
Thermal Resistance to Ambient (θ_JA)
Thermal Resistance to Case (θ_JC)
Junction Temperature (T_J)
Storage Temperature Range
Lead Temperature (soldering 10 sec.)
Susceptibility ⁽⁴⁾
Machine Model ⁽⁵⁾
4.0 kV
400V
5.5V
V_CC −0.5 ≥ V_IN ≥ 0V
0.0V ≤ V_IN ≤ 1.2V
110°C/W
25°C/W
+150°C
−65°C to +150°C
265°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications, see the Electrical
Characteristics tables.
(2) All voltages are measured with respect to GND, unless otherwise specified.
(3) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(4) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
(5) The Machine Model ESD test is covered by specification EIAJ IC-121-1981. A 200 pF cap is charged to the specific voltage, then
discharged directly into the IC with no external series resistor (resistance of discharge path must be under 50Ω).
Operating Ratings ⁽¹⁾
Operating Temperature Range ⁽²⁾
−20°C to +80°C
Supply Voltage (V_CC)
RGB Video Inputs (pk-pk)
Y Video Inputs (incl. Sync)
P_BP_R Video Inputs
4.75V ≤ V_CC ≤ 5.25V
0.0V ≤ V_IN ≤ 0.7V
-0.3V ≤ V_IN ≤ 0.7V
-0.35V ≤ V_IN ≤ 0.35V
(1) Operating Ratings indicate conditions for which the device is functional, but do not ensure specific performance limits. All video inputs
must be properly terminated.
(2) The maximum power dissipation is a function of T_J(MAX), θ_JA. The maximum allowable power dissipation at any ambient temperature is
P_D = (T_J(MAX) – T_A)/ θ_JA. All numbers apply for packages soldered directly onto a PC Board.
Copyright © 2005–2013, Texas Instruments Incorporated
Product Folder Links: LMH1251
Submit Documentation Feedback
3