THS4041 Datasheet, PDF (5/28 Pages) Texas Instruments – 165-MHz C-STABLE HIGH-SPEED AMPLIFIERS

THS4041, THS4042
165-MHz C-STABLE HIGH-SPEED AMPLIFIERS
SLOS237B– MAY 1999 – REVISED FEBRUARY 2000
electrical characteristics at T_A = 25°C, V_CC = ±15 V, R_L = 150 Ω (unless otherwise noted) (continued)
output characteristics
PARAMETER
TEST CONDITIONS†
MIN TYP MAX UNIT
VO
Output voltage swing
IO
Output current‡
ISC
Short-circuit current‡
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
VCC = ±5 V
VCC = ±15 V
RL = 250 Ω
±11.5 ±13
V
RL = 150 Ω
±3.2 ±3.5
±13 ±13.6
RL = 1 kΩ
±3.5 ±3.8
V
80 100
RL = 20 Ω
50
65
mA
150
mA
RO
Output resistance
Open loop
13
Ω
† _{Full range = 0°C to 70°C for C suffix and – 40°C to 85°C for I suffix}
‡ _{Observe power dissipation ratings to keep the junction temperature below the absolute maximum rating when the output is heavily loaded or}
shorted. See the absolute maximum ratings section of this data sheet for more information.
power supply
PARAMETER
TEST CONDITIONS†
MIN TYP MAX UNIT
VCC Supply voltage operating range
Dual supply
Single supply
±4.5
±16.5
V
9
33
ICC Supply current (per amplifier)
VCC = ±15 V
VCC = ±5 V
PSRR Power supply rejection ratio
VCC = ±5 V or ±15 V
† _{Full range = 0°C to 70°C for C suffix and – 40°C to 85°C for I suffix}
TA = 25°C
8 9.5
TA = full range
TA = 25°C
11
mA
7 8.5
TA = full range
10
TA = 25°C
75
84
dB
TA = full range
70
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5