OPA140_15 Datasheet, PDF (5/44 Pages) Texas Instruments – High-Precision, Low-Noise, Rail-to-Rail Output,11-MHz JFET Op Amp

www.ti.com
OPA140, OPA2140, OPA4140
SBOS498B – JULY 2010 – REVISED NOVEMBER 2015
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
Supply voltage, V_S = (V+) – (V–)
Signal input pins
Voltage ⁽²⁾
Current ⁽²⁾
Output short circuit⁽³⁾
Operating
Temperature
Junction
Storage, T_stg
MIN
MAX
40
(V–) – 0.5
(V+) + 0.5
–10
10
Continuous
–55
150
150
–65
150
UNIT
V
V
mA
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5 V beyond the supply rails should
be current-limited to 10 mA or less.
(3) Short-circuit to V_S/2 (ground in symmetrical dual-supply setups), one amplifier per package.
6.2 ESD Ratings
V_(ESD) Electrostatic discharge
Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001⁽¹⁾
Charged-device model (CDM), per JEDEC specification JESD22-C101⁽²⁾
VALUE
±2000
±500
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
UNIT
V
V
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
Supply voltage
Specified temperature
MIN
±2.25
–40
NOM
MAX
±18
125
UNIT
V
°C
Copyright © 2010–2015, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Links: OPA140 OPA2140 OPA4140