English
Language : 

OPA140_15 Datasheet, PDF (1/44 Pages) Texas Instruments – High-Precision, Low-Noise, Rail-to-Rail Output,11-MHz JFET Op Amp
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
OPA140, OPA2140, OPA4140
SBOS498B – JULY 2010 – REVISED NOVEMBER 2015
High-Precision, Low-Noise, Rail-to-Rail Output,
11-MHz JFET Op Amp
1 Features
•1 Very Low Offset Drift: 1 μV/°C Maximum
• Very Low Offset: 120 μV
• Low Input Bias Current: 10 pA Maximum
• Very Low 1/f Noise: 250 nVPP, 0.1 Hz to 10 Hz
• Low Noise: 5.1 nV/√Hz
• Slew Rate: 20 V/μs
• Low Supply Current: 2 mA Maximum
• Input Voltage Range Includes V– Supply
• Single-Supply Operation: 4.5 V to 36 V
• Dual-Supply Operation: ±2.25 V to ±18 V
• No Phase Reversal
• Industry-Standard SOIC Packages
• VSSOP, TSSOP, and SOT-23 Packages
2 Applications
• Battery-Powered Instruments
• Industrial Controls
• Medical Instrumentation
• Photodiode Amplifiers
• Active Filters
• Data Acquisition Systems
• Automatic Test Systems
3 Description
The OPA140, OPA2140, and OPA4140 operational
amplifier (op amp) family is a series of low-power
JFET input amplifiers that features good drift and low
input bias current. The rail-to-rail output swing and
input range that includes V– allow designers to take
advantage of the low-noise characteristics of JFET
amplifiers while also interfacing to modern, single-
supply, precision analog-to-digital converters (ADCs)
and digital-to-analog converters (DACs).
The OPA140 achieves 11-MHz unity-gain bandwidth
and 20-V/μs slew rate while consuming only 1.8 mA
(typical) of quiescent current. It runs on a single 4.5-V
to 36-V supply or dual ±2.25-V to ±18-V supplies.
All versions are fully specified from –40°C to 125°C
for use in the most challenging environments. The
OPA140 (single) is available in the 5-pin SOT-23, 8-
pin VSSOP, and 8-pin SOIC packages; the OPA2140
(dual) is available in both 8-pin VSSOP and 8-pin
SOIC packages; and the OPA4140 (quad) is
available in the 14-pin SOIC and 14-pin TSSOP
packages.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
SOIC (8)
4.90 mm × 3.90 mm
OPA140
SOT23 (5)
2.90 mm × 1.60 mm
VSSOP (8)
3.00 mm × 3.00 mm
OPA2140
SOIC (8)
VSSOP (8)
4.90 mm × 3.90 mm
3.00 mm × 3.00 mm
OPA4140
SOIC (14)
TSSOP (14)
8.65 mm × 3.90 mm
5.00 mm × 4.40 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
0.1-Hz to 10-Hz Noise
VSUPPLY = ±18V
OPAx140
Competitor’s Device
Time (1s/div)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.