DRV10963 Datasheet, PDF (5/14 Pages) Texas Instruments – 5-V, THREE PHASE, SENSORLESS BLDC MOTOR DRIVER

www.ti.com
ELECTRICAL CHARACTERISTICS
(VCC = 5 V, T_A = 25°C unless otherwise noted)
PARAMETER
SUPPLY CURRENT
I_VCC
I_{VCC_STBY}
UVLO
Operating current
Standby current
V_{UVLO_H}
Undervoltage threshold high
V_{UVLO_L}
Undervoltage threshold low
V_{UVLO_HYS}
Undervoltage threshold hysteresis
INTEGRATED MOSFET
R_DSON
PWM
Series resistance (H+L)
V_{IH_PWM}
V_{IL_PWM}
F_PWM
Input high threshold
Input low threshold
PWM input frequency
R_{PU_PWM_VCC} PWM pin pull up resistor
TSTBY
FG
I_{OL_FG}
I_{SC_FG}
FGS and FR
V_{IH_FGS}
V_{IL_FGS}
V_{IH_FR}
V_{IL_FR}
Standby entry time
FG sink current
FG short circuit current
Input high threshold
Input low threshold
Input high threshold
Input low threshold
R_{PU_FGS_VCC} FGS pin pull up resistor
R_{PU_FR_VCC}
FR pin pull up resistor
LOCK PROTECTION
T_{ON_LOCK}
Lock detect time
T_{OFF_LOCK}
Lock release time
CURRENT LIMIT
I_LIM
Current limit value
SHORT CIRCUIT CURRENT PROTECTION
I_SHT
Short circuit current protection
THERMAL SHUTDOWN
T_SD
T_{SD_HYS}
Thermal shutdown temperature
Thermal shutdown hysteresis
TEST CONDITION
PWM = V_CC, no motor connected
PWM = 0 V
V_CC = 5 V; I_OUT = 0.5 A
Duty cycle >0% and <100%
Active Mode
Standby Mode
PWM = 0 V
V_FG = 0.3 V
V_FG = 5 V
Active Mode
Standby Mode
DRV10963
SLAS955 – MARCH 2013
MIN TYP MAX UNIT
5.5
mA
15
20 µA
2 2.1 V
1.7 1.8
V
100 200 300 mV
1 1.5 Ω
2.3
V
0.8 V
15
100 kHz
50
kΩ
2
MΩ
500
µs
5
mA
13
25 mA
2.3
2.3
50
2
500
V
0.8 V
V
0.8 V
kΩ
MΩ
kΩ
0.3
s
5
s
500
mA
1.8
A
160
°C
10
°C
Copyright © 2013, Texas Instruments Incorporated
Product Folder Links: DRV10963
Submit Documentation Feedback
5