MSP430F2101 Datasheet, PDF (40/53 Pages) Texas Instruments – MIXED SIGNAL MICROCONTROLLER

MSP430x21x1
MIXED SIGNAL MICROCONTROLLER
SLAS439C − SEPTEMBER 2004 − REVISED JULY 2006
Port P2 (P2.6) pin functions
PIN NAME (P2.X)
X
FUNCTION
CONTROL BITS / SIGNALS
P2DIR.x
P2SEL.x
CAPD.x
P2.6/XIN/CA6
6 P2.6 (I/O)
I: 0; O: 1
0
0
XIN†
X
1
0
CA6 (see Note 3)
X
X
1
† _{Default after reset (PUC/POR)}
NOTES: 1. N/A: Not available or not applicable.
2. X: Don’t care.
3. Setting the CAPD.x bit disables the output driver as well as the input Schmitt trigger to prevent parasitic cross currents when applying
analog signals. Selecting the CAx input pin to the comparator multiplexer with the P2CAx bits automatically disables the input buffer
for that pin, regardless of the state of the associated CAPDx bit.
Port P2 (P2.7) pin functions
PIN NAME (P2.X)
X
FUNCTION
CONTROL BITS / SIGNALS
P2DIR.x
P2SEL.x
CAPD.x
P2.7/XOUT/CA7
6 P2.7 (I/O)
I: 0; O: 1
0
0
XOUT† (see Note 4)
X
1
0
CA7 (see Note 3)
X
X
1
† _{Default after reset (PUC/POR)}
NOTES: 1. N/A: Not available or not applicable.
2. X: Don’t care.
3. Setting the CAPD.x bit disables the output driver as well as the input Schmitt trigger to prevent parasitic cross currents when applying
analog signals. Selecting the CAx input pin to the comparator multiplexer with the P2CAx bits automatically disables the input buffer
for that pin, regardless of the state of the associated CAPD.x bit.
4. If the pin XOUT/P2.7/CA7 is used as an input a current can flow until P2SEL.7 is cleared due to the oscillator output driver connection
to this pin after reset.
40
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265