English
Language : 

TS3DV416_09 Datasheet, PDF (4/18 Pages) Texas Instruments – 4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH FOR DVI/HDMI APPLICATIONS
◁
TS3DV416
4-CHANNEL DIFFERENTIAL 8:16 MULTIPLEXER SWITCH
FOR DVI/HDMI APPLICATIONS
SCDS198C – OCTOBER 2005 – REVISED MAY 2006
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
www.ti.com
VDD Supply voltage range
VIN
Control input voltage range(2)(3)
VI/O Switch I/O voltage range(2)(3)(4)
IIK
Control input clamp current
II/OK I/O port clamp current
II/O
ON-state switch current(5)
Continuous current through VDD or GND
θJA
Package thermal impedance(6)
Tstg Storage temperature range
VIN < 0
VI/O < 0
DGG package
DGV package
MIN MAX UNIT
–0.5 4.6 V
–0.5
7V
–0.5
7V
–50 mA
–50 mA
±128 mA
±100 mA
70
°C/W
58
–65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) VI and VO are used to denote specific conditions for VI/O.
(5) II and IO are used to denote specific conditions for II/O.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
Recommended Operating Conditions(1)
VDD Supply voltage
VIH High-level control input voltage (SEL)
VIL Low-level control input voltage (SEL)
VI/o Input/output voltage
TA
Operating free-air temperature
MIN MAX UNIT
3
3.6 V
2
5.5 V
0
0.8 V
0
5.5 V
–40
85 °C
(1) All unused inputs of the device must be held at VDD or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4
Submit Documentation Feedback
 ▷