THS7365 Datasheet, PDF (3/53 Pages) Texas Instruments – 6-Channel Video Amplifier with 3-SD and 3-HD Sixth-Order Filters and 6-dB Gain

THS7365
www.ti.com.................................................................................................................................................................................................. SBOS467 – MARCH 2009
ELECTRICAL CHARACTERISTICS: V_S+ = +3.3 V
At T_A = +25°C, R_L = 150 Ω to GND, Filter mode, and dc-coupled input/output, unless otherwise noted.
PARAMETER
TEST CONDITIONS
THS7365
MIN
TYP
MAX
TEST
UNITS LEVEL⁽¹⁾
AC PERFORMANCE (SD CHANNELS)
Passband bandwidth
–1 dB; V_O = 0.2 V_PP and 2 V_PP
7
8.2
10.2
MHz
B
Small- and large-signal bandwidth
–3 dB; V_O = 0.2 V_PP and 2 V_PP
7.8
9.5
11.4
MHz
B
Bypass mode bandwidth
–3 dB; V_O = 0.2 V_PP
85
130
MHz
B
Slew rate
Attenuation
Bypass mode; V_O = 2 V_PP
75
100
V/µs
B
With respect to 500 kHz⁽²⁾, f = 6.75 MHz
–0.9
0.2
1.1
dB
B
With respect to 500 kHz⁽²⁾, f = 27 MHz
42
54
dB
B
Group delay
f = 100 kHz
72
ns
C
Group delay variation
f = 5.1 MHz with respect to 100 kHz
10
ns
C
Channel-to-channel delay
0.3
ns
C
Differential gain
NTSC/PAL
0.2/0.35
%
C
Differential phase
NTSC/PAL
0.3/0.42
Degrees
C
Total harmonic distortion
Signal-to-noise ratio
f = 1 MHz, V_O = 1.4 V_PP
100 kHz to 6 MHz, non-weighted
100 kHz to 6 MHz, unified weighting
–70
dB
C
70
dB
C
78
dB
C
Gain
Output impedance
All channels, T_A = +25°C
All channels, T_A = –40°C to +85°C
f = 6.75 MHz, Filter mode
f = 6.75 MHz, Bypass mode
Disabled
5.7
6
6.3
dB
A
5.65
6.35
dB
B
0.7
Ω
C
0.6
Ω
C
20 || 3
kΩ || pF
C
Return loss
f = 6.75 MHz, Filter mode
46
dB
C
Crosstalk
f = 1 MHz, SD to SD channel and SD to HD
channel
–78
dB
C
AC PERFORMANCE (HD CHANNELS)
Passband bandwidth
–1 dB; V_O = 0.2 V_PP and 2 V_PP
27.2
32
38.2
MHz
B
Small- and large-signal bandwidth
–3 dB; V_O = 0.2 V_PP and 2 V_PP
30.3
36
43
MHz
B
Bypass mode bandwidth
–3 dB; V_O = 0.2 V_PP
170
250
MHz
B
Slew rate
Attenuation
Bypass mode; V_O = 2 V_PP
With respect to 500 kHz⁽²⁾, f = 27 MHz
With respect to 500 kHz⁽²⁾, f = 74 MHz
420
500
–1
0
34
42
V/µs
B
1
dB
B
dB
B
Group delay
f = 100 kHz
22
ns
C
Group delay variation
f = 27 MHz with respect to 100 kHz
7.5
ns
C
Channel-to-channel delay
0.3
ns
C
Differential gain
NTSC/PAL
0.1/0.1
%
C
Differential phase
NTSC/PAL
0.2/0.25
Degrees
C
Total harmonic distortion
Signal-to-noise ratio
f = 10 MHz, V_O = 1.4 V_PP
100 kHz to 30 MHz, non-weighted
100 kHz to 30 MHz, unified weighting
–49
dB
C
62
dB
C
72
dB
C
Gain
All channels, T_A = +25°C
All channels, T_A = –40°C to +85°C
5.7
6
6.3
dB
A
5.65
6.35
dB
B
(1) Test levels: (A) 100% tested at +25°C. Over temperature limits set by characterization and simulation. (B) Limits set by characterization
and simulation only. (C) Typical value only for information.
(2) 3.3-V supply filter specifications are ensured by 100% testing at 5-V supply along with design and characterization.
Copyright © 2009, Texas Instruments Incorporated
Product Folder Link(s): THS7365
Submit Documentation Feedback
3