SN74AUP3G06 Datasheet, PDF (3/13 Pages) Texas Instruments – LOW-POWER TRIPLE INVERTER BUFFER/DRIVER WITH OPEN-DRAIN OUTPUTS

SN74AUP3G06
www.ti.com
SCES775A – DECEMBER 2009 – REVISED DECEMBER 2009
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN
MAX UNIT
V_CC
Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Voltage range applied to any output in the high-impedance or power-off state⁽²⁾
V_O
Output voltage range in the high or low state⁽²⁾
I_IK
Input clamp current
V_I < 0
I_OK
Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through V_CC or GND
DCU package
–0.5
4.6
V
–0.5
4.6
V
–0.5
4.6
V
–0.5 V_CC + 0.5
V
–50 mA
–50 mA
±20 mA
±50 mA
220
θ_JA
Package thermal impedance⁽³⁾
DQE package
RSE package
261
°C/W
253
YFP package
132
T_stg
Storage temperature range
–65
150
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
Copyright © 2009, Texas Instruments Incorporated
Product Folder Link(s): SN74AUP3G06
Submit Documentation Feedback
3