DS90LV047ATMX Datasheet, PDF (3/21 Pages) Texas Instruments – DS90LV047A 3V LVDS Quad CMOS Differential Line Driver

DS90LV047A
www.ti.com
SNLS044C – MAY 2000 – REVISED APRIL 2013
Electrical Characteristics
Over supply voltage and operating temperature ranges, unless otherwise specified^(1)(2)(3)
Symbol
Parameter
Conditions
Pin
Min
Typ Max Units
V_OD1
ΔV_OD1
Differential Output Voltage
Change in Magnitude of V_OD1 for
Complementary Output States
R_L = 100Ω (Figure 2)
D_OUT−
250
310
450
mV
D_OUT+
1
35
|mV|
V_OS
ΔV_OS
Offset Voltage
Change in Magnitude of V_OS for
Complementary Output States
1.125 1.17 1.375
1
25
V
|mV|
V_OH
Output High Voltage
V_OL
Output Low Voltage
V_IH
Input High Voltage
V_IL
Input Low Voltage
I_IH
Input High Current
I_IL
Input Low Current
V_CL
Input Clamp Voltage
I_OS
Output Short Circuit Current⁽⁴⁾
I_OSD
Differential Output Short Circuit
Current ⁽⁴⁾
V_IN = V_CC or 2.5V
V_IN = GND or 0.4V
I_CL = −18 mA
ENABLED,
D_IN = V_CC, D_OUT+ = 0V or
D_IN = GND, D_OUT− = 0V
ENABLED, V_OD = 0V
1.33
1.6
V
0.90 1.02
V
D_IN,
2.0
V_CC
V
EN,
EN*
GND
0.8
V
−10
2
+10
μA
−10
−2
+10
μA
−1.5 −0.8
V
D_OUT−
D_OUT+
−4.2 −9.0
mA
−4.2 −9.0
mA
I_OFF
Power-off Leakage
V_OUT = 0V or 3.6V, V_CC = 0V or
Open
−20
±1
+20
μA
I_OZ
Output TRI-STATE Current
EN = 0.8V and EN* = 2.0V
V_OUT = 0V or V_CC
I_CC
No Load Supply current Drivers
D_IN = V_CC or GND
Enabled
−10
±1
+10
μA
V_CC
4.0
8.0
mA
I_CCL
Loaded Supply Current Drivers
Enabled
R_L = 100Ω All Channels, D_IN = V_CC
or GND (all inputs)
20
30
mA
I_CCZ
No Load Supply Current Drivers
D_IN = V_CC or GND, EN = GND, EN*
Disabled
= V_CC
2.2
6.0
mA
(1) Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground
except: V_OD1 and ΔV_OD1.
(2) All typicals are given for: V_CC = +3.3V, T_A = +25°C.
(3) The DS90LV047A is a current mode device and only functions within datasheet specifications when a resistive load is applied to the
driver outputs typical range is (90Ω to 110Ω).
(4) Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only.
Copyright © 2000–2013, Texas Instruments Incorporated
Product Folder Links: DS90LV047A
Submit Documentation Feedback
3