BQ27510-G3 Datasheet, PDF (3/20 Pages) Texas Instruments – System-Side Impedance Track Fuel Gauge With Direct Battery Connection

bq27510-G3
www.ti.com
ELECTRICAL SPECIFICATIONS
SLUSAT1 – MARCH 2013
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
V_REGIN
V_CC
V_IOD
V_BAT
V_I
T_F
T_STG
ESD
Regulator input voltage
Supply voltage range
Open-drain I/O pins (SDA, SCL, GPOUT)
BAT input pin
Input voltage range to all other pins (TS, SRP, SRN, BI/TOUT)
Functional temperature range
Storage temperature range
Human Body Model (HBM), BAT pin
Human Body Model (HBM), all other pins
VALUE
MIN
MAX
–0.3
24
–0.3
2.75
–0.3
6
–0.3
6
–0.3
–40
V_CC + 0.3
100
–65
150
1.5
2
UNIT
V
V
V
V
V
°C
°C
KV
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
THERMAL INFORMATION
THERMAL METRIC⁽¹⁾
θ_JA
θ_JCtop
θ_JB
ψ_JT
ψ_JB
θ_JCbot
Junction-to-ambient thermal resistance
Junction-to-case (top) thermal resistance
Junction-to-board thermal resistance
Junction-to-top characterization parameter
Junction-to-board characterization parameter
Junction-to-case (bottom) thermal resistance
DRZ (12-PINS)
64.1
59.8
52.7
0.3
28.3
2.4
UNITS
°C/W
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
RECOMMENDED OPERATING CONDITIONS
T_A = 25°C, V_CC = 2.5 V (unless otherwise noted)
PARAMETER
V_REGIN
Supply voltage
C_REG25
t_PUCD
I_CC
I_SLP
I_SLP+
I_HIB
V_OL
V_OH(PP)
V_OH(OD)
V_IL
V_IH(OD)
V_A1
V_A2
External REG25 capacitor
Power Up Communication Delay
Normal operating mode current
Low-power operating mode current
Low-power operating mode current
Hibernate operating mode current
Output voltage low (SDA, GPOUT, BI/TOUT)
Output high voltage (GPOUT)
Output high voltage (SDA, SCL, BI/TOUT)
Input voltage low (SDA, SCL)
Input voltage low (BI/TOUT)
Input voltage high (SDA, SCL)
Input voltage high (BI/TOUT)
Input voltage range (TS)
Input voltage range (BAT)
TEST CONDITION
No operating restrictions
No FLASH writes
C_REG25
Fuel gauge in NORMAL mode,
I_LOAD > Sleep Current
Fuel gauge in SLEEP mode.
I_LOAD < Sleep Current
Fuel gauge in SLEEP+ mode.
I_LOAD < Sleep Current
Fuel gauge in HIBERNATE mode.
I_LOAD < Hibernate Current
I_OL = 0.5 mA
I_OH = –1 mA
External pull-up resistor connected to Vcc
BAT INSERT CHECK MODE active
BAT INSERT CHECK MODE active
Copyright © 2013, Texas Instruments Incorporated
MIN TYP
2.7
2.45
0.47
250
103
MAX
5.5
2.7
UNIT
V
µF
ms
μA
18
μA
60
μA
4
μA
V_CC–0.5
V_CC–0.5
–0.3
–0.3
1.2
1.2
V_SS–0.125
V_SS–0.125
0.4
V
V
V
0.6
V
0.6
6
V
6
2
V
5
V
Submit Documentation Feedback
3