CC3000EM Datasheet, PDF (20/22 Pages) Texas Instruments – TI CC3000 Evaluation Module

www.ti.com
Figure 3-6 shows the supply routing guidelines:
• For power supply routing, the power trace for VBAT must be at least 40 mil wide.
• The 1.8-V trace must be at least 18 mil wide.
• Make VBAT traces as wide as possible to ensure reduced inductance and trace resistance.
• If possible, shield VBAT traces with ground above, below, and beside the traces.
SWRU326-012
Figure 3-6. Power Supply Routing of the CC3000 EM Board
20
Layout Guidelines
Copyright © 2012, Texas Instruments Incorporated
SWRU326 – November 2012
Submit Documentation Feedback