TLC27M4 Datasheet, PDF (2/37 Pages) Texas Instruments – LinCMOSE PRECISION QUAD OPERATIONAL AMPLIFIERS

TLC27M4, TLC27M4A, TLC27M4B, TLC27M4Y, TLC27M9
LinCMOS™ PRECISION QUAD OPERATIONAL AMPLIFIERS
SLOS093C – OCTOBER 1987 – REVISED MAY 1999
description (continued)
Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27M4 (10
mV) to the high-precision TLC27M9 (900 µV). These advantages, in combination with good common-mode
rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as
well as for upgrading existing designs.
In general, many features associated with bipolar technology are available on LinCMOS™ operational
amplifiers, without the power penalties of bipolar technology. General applications such as transducer
interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the
TLC27M4 and TLC27M9. The devices also exhibit low voltage single-supply operation, and low power
consumption, making them ideally suited for remote and inaccessible battery-powered applications. The
common-mode input voltage range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density
system applications.
The device inputs and outputs are designed to withstand – 100-mA surge currents without sustaining latch-up.
The TLC27M4 and TLC27M9 incorporate internal ESD-protection circuits that prevent functional failures at
voltages up to 2000 V as tested under MIL-STD-883C, Method 3015; however, care should be exercised in
handling these devices, as exposure to ESD may result in the degradation of the device parametric
performance.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of – 55°C to 125°C.
AVAILABLE OPTIONS
PACKAGE
TA
VIOmax
AT 25°C
SMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
PLASTIC
DIP
(N)
TSSOP
(PW)
900 µV TLC27M9CD
—
—
TLC27M9CN
—
0°C to 70°C
2 mV TLC27M4BCD
—
5 mV TLC27M4ACD
—
—
TLC27M4BCN
—
—
TLC27M4ACN
—
10 mV TLC27M4CD
—
—
TLC27M4CN TLC27M4CPW
900 µV TLC27M9ID
—
—
TLC27M9IN
—
2 mV TLC27M4BID
—
– 40°C to 85°C
5 mV TLC27M4AID
—
—
TLC27M4BIN
—
—
TLC27M4AIN
—
10 mV TLC27M4ID
—
—
TLC27M4IN TLC27M41PW
900 µV TLC27M9MD TLC27M9MFK TLC27M9MJ TLC27M9MN
—
– 55°C to 125°C
10 mV TLC27M4MD TLC27M4MFK TLC27M4MJ TLC27M4MN
—
The D and PW package is available taped and reeled. Add R suffix to the device type (e.g., TLC279CDR).
CHIP
FORM
(Y)
—
—
—
TLC27M4Y
—
—
—
—
—
—
2
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265