XIO2213B Datasheet, PDF (188/199 Pages) Texas Instruments – PCI Express™ TO 1394b OHCI WITH 3-PORT PHY

XIO2213B
PCI Express™ TO 1394b OHCI WITH 3-PORT PHY
SCPS210D – OCTOBER 2008 – REVISED JULY 2009
11 Electrical Characteristics
www.ti.com
11.1 Absolute Maximum Ratings⁽¹⁾
over operating temperature range (unless otherwise noted)
VALUE
UNIT
V_{SUP_33 Supply voltage range}
V_{SUP_15} Supply voltage range
V_{CORE_19 Supply voltage range}
5
DVDD_33, V_{DDA_33}, V_{DDA_33}, V_{DDPLL_33}, V_{DD_33_COMB},
V_{DD_33_COMBIO}
V_{DD_15}, V_{DDA_15}, V_PP, V_DDPLL, V_{DD_15_COMB}
PLLVDD_CORE, DVDD_CORE
PCIe (RX)
PCIe REFCLK (single ended)
V_I
Input voltage range
PCIe REFCLK (differential)
Miscellaneous 3.3-V I/O
PHY interface
PCIe (TX)
V_O
Output voltage range Miscellaneous 3.3-V I/O
PHY interface
Input clamp current (V_I < 0 or V_I > VDD)⁽²⁾
Output clamp current (V_O < 0 or V_O > VDD)⁽³⁾
T_stg
Storage temperature range
0.3 to 3.6
V
0.5 to 1.65
V
0.5 to 2.05
V
0.5 to V_{SUP_33} + 0.5
0.5 to V_{SUP_15} + 0.5
0.5 to V_{SUP_33} + 0.5
V
0.5 to V_{SUP_33} + 0.5
0.5 to V_{SUP_33} + 0.5
0.5 to V_{SUP_15} + 0.5
0.5 to V_{SUP_33} + 0.5
V
0.5 to V_{SUP_33} + 0.5
20
mA
20
mA
-65 to 150
°C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Applies for external input and bidirectional buffers. V_I < 0 or V_I > V_DD or V_I > V_CCP
(3) Applies for external input and bidirectional buffers. V_O < 0 or V_O > V_DD or V_O > V_CCP
11.2 Recommended Operating Conditions
V_{SUP_15}
V_{SUP_33}
V_{CORE_195}
T_A
T_J
θ_JA
Supply voltage
Supply voltage (I/O)
Supply voltage
Operating ambient temperature
Junction temperature
Junction-to-free-air thermal resistance
OPERATION
1.5 V
3.3 V
1.95 V
Low K JEDEC
test board, 1s, no
air flow - ZAY
Low K JEDEC
test board, 1s, no
air flow - ZAJ
High K JEDEC
test board, 2s2p
no air flow - ZAY
High K JEDEC
test board, 2s2p
no air flow - ZAJ
High K JEDEC
test board, 2s2p
200 LFM - ZAY
High K JEDEC
test board, 2s2p
200 LFM - ZAJ
MIN NOM MAX UNIT
1.35 1.5 1.65 V
3 3.3 3.6 V
1.85 1.95 2.05 V
0
25
70 °C
0
25 105 °C
85
°C/W
88
°C/W
65
°C/W
42.1
°C/W
52
°C/W
33
°C/W
188 Electrical Characteristics
Submit Documentation Feedback