DRV5033_15 Datasheet, PDF (18/26 Pages) Texas Instruments – DRV5033 Digital-Omnipolar-Switch Hall Effect Sensor

DRV5033
SLIS152C – MAY 2014 – REVISED MAY 2015
11 Device and Documentation Support
11.1 Device Support
11.1.1 Device Nomenclature
Figure 22 shows a legend for reading the complete device name for and DRV5033 device.
DRV5033
(AJ) (Q) (DBZ) (R)
()
Prefix
DRV5033: Omnipolar hall sensor
BOP/BRP
AJ: ±6.9/±3.5 mT
AEC-Q100
Q1: Automotive qualification
Blank: Non-auto
Tape and Reel
R: 3000 pcs/reel
T: 250 pcs/reel
M: 1000 pcs/bag (bulk)
Blank: 3000 pcs/box (ammo)
11.1.2 Device Markings
Marked Side
3
Package
DBZ: 3-pin SOT (SMT)
LPG: 3-pin SIP (through-hole)
Temperature Range
Q: ±40 to 125°C
E: ±40 to 150°C
Figure 22. Device Nomenclature
Marked Side Front
www.ti.com
1
2
12 3
Marked Side
Figure 23. SOT-23 (DBZ) Package
12 3
(Bottom view)
Figure 24. SIP (LPG) Package
indicates the Hall effect sensor (not to scale). The Hall element is located in the center of the package with a
tolerance of ±100 µm. The height of the Hall element from the bottom of the package is 0.7 mm ±50 µm in the DBZ
package and 0.987 mm ±50 µm in the LPG package.
11.2 Community Resources
The following links connect to TI community resources. Linked contents are provided "AS IS" by the respective
contributors. They do not constitute TI specifications and do not necessarily reflect TI's views; see TI's Terms of
Use.
TI E2E™ Online Community TI's Engineer-to-Engineer (E2E) Community. Created to foster collaboration
among engineers. At e2e.ti.com, you can ask questions, share knowledge, explore ideas and help
18
Submit Documentation Feedback
Product Folder Links: DRV5033
Copyright © 2014–2015, Texas Instruments Incorporated