DRV5033_15 Datasheet, PDF (1/26 Pages) Texas Instruments – DRV5033 Digital-Omnipolar-Switch Hall Effect Sensor

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DRV5033
SLIS152C – MAY 2014 – REVISED MAY 2015
DRV5033 Digital-Omnipolar-Switch Hall Effect Sensor
1 Features
•1 Digital Omnipolar-Switch Hall Sensor
• Superior Temperature Stability
– B_OP ±10% Over Temperature
• High Sensitivity (B_OP and B_RP)
– ±6.9 / ±3.5 mT (AJ)
• Detects North and South Magnetic Field
• Supports a Wide Voltage Range
– 2.5 to 38 V
– No External Regulator Required
• Wide Operating Temperature Range
– T_A = –40 to 125°C (Q, see Figure 22)
• Open Drain Output (30-mA Sink)
• Fast 35-µs Power-On Time
• Small Package and Footprint
– Surface Mount 3-Pin SOT-23 (DBZ)
– 2.92 mm × 2.37 mm
– Through-Hole 3-Pin SIP (LPG)
– 4.00 mm × 3.15 mm
• Protection Features
– Reverse Supply Protection (up to –22 V)
– Supports up to 40-V Load Dump
– Output Short-Circuit Protection
– Output Current Limitation
2 Applications
• Docking Detection
• Door Open and Close Detection
• Proximity Sensing
• Valve Positioning
• Pulse Counting
3 Description
The DRV5033 device is a chopper-stabilized Hall
Effect Sensor that offers a magnetic sensing solution
with superior sensitivity stability over temperature and
integrated protection features.
The DRV5033 responds the same to both polarities
of magnetic field direction. When the applied
magnetic flux density exceeds the B_OP threshold, the
DRV5033 open drain output goes low. The output
stays low until the field decreases to less than B_RP,
and then the output goes to high impedance. The
output current sink capability is 30 mA. A wide
operating voltage range from 2.5 to 38 V with reverse
polarity protection up to –22 V makes the device
suitable for a wide range of industrial applications.
Internal protection functions are provided for reverse
supply conditions, load dump, and output short circuit
or over current.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DRV5033
SOT-23 (3)
SIP (3)
2.92 mm × 2.37 mm
4.00 mm × 3.15 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Output State
B_HYS
OUT
B_HYS
SOT-23
SIP
B_OP (N)
B_RP (N) B_OF B_RP (S)
B (mT)
B_OP (S)
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.