 English |
|
|
|
|
|
|
|
| DRV5033_15 Datasheet, PDF (11/26 Pages) Texas Instruments – DRV5033 Digital-Omnipolar-Switch Hall Effect Sensor | |||
| |||
| ◁ |
www.ti.com
DRV5033
SLIS152C â MAY 2014 â REVISED MAY 2015
Feature Description (continued)
If the device is powered on with the magnetic field strength BRP < B < BOP, then the device output is
indeterminate and can either be Hi-Z or pulled low. During the power-up sequence, the output is held Hi-Z until
ton has elapsed. At the end of ton, a pulse is given on the OUT pin to indicate that ton has elapsed. After ton, if the
magnetic field changes such that BOP < B, the output is released. Case 3 (Figure 15) and Case 4 (Figure 16)
show examples of this behavior.
VCC
t (s)
B (mT)
BOP
BRP
t (s)
OUT
Valid Output
t (s)
ton
td
Figure 15. Case 3: Power On When BRP < B < BOP, Followed by B > BOP
Copyright © 2014â2015, Texas Instruments Incorporated
Product Folder Links: DRV5033
Submit Documentation Feedback
11
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese