TC217 Datasheet, PDF (16/21 Pages) Texas Instruments – 1158- × 488-pixel ccd image sensor

TC217
1158- × 488-PIXEL CCD IMAGE SENSOR
SOCS015C – OCTOBER 1989 – REVISED JUNE 1996
PARAMETER MEASUREMENT INFORMATION
VO
Blooming Point
With Antiblooming
Enabled
Blooming Point
With Antiblooming
Disabled
Dependent on
Well Capacity
Vsat _(min)
Vuse _(max)
Level Dependent
Upon Antiblooming
Gate High Level
Vuse _(typ)
DR
Vn
+ DR (dynamic range)
camera white clip voltage
Vn
Lux
(light input)
Vn = noise floor voltage
Vsat _(min) = minimum saturation voltage
Vuse _(max) = maximum usable voltage
Vuse _(typ) = typical user voltage (camera white clip)
NOTES: A. Vuse _(typ) is defined as the voltage determined to equal the camera white clip. This voltage must be less than Vuse _(max).
B. A system trade-off is necessary to determine the system light sensitivity versus the signal/noise ratio. By lowering the Vuse _(typ),
the light sensitivity of the camera is increased; however, this sacrifices the signal/noise ratio of the camera.
Figure 16. Typical V_sat, V_use Relationship
16
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265