BQ24195 Datasheet, PDF (16/41 Pages) Texas Instruments – I2C Controlled 2.5A / 4.5A Single Cell USB/Adapter Charger With 5.1V at 1A / 5.1V at 2.1A Synchronous Boost Operation

bq24195
bq24195L
SLUSB97 – OCTOBER 2012
www.ti.com
Thermal Regulation Control Register REG06 (default 00000011, or 03)
BIT
DESCRIPTION
NOTE
Bit 7 Reserved
0 - Reserved
Bit 6 Reserved
0 - Reserved
Bit 5 Reserved
0 - Reserved
Bit 4 Reserved
0 - Reserved
Bit 3 Reserved
0 - Reserved
Bit 2 Reserved
0 - Reserved
Thermal Regulation Threshold
Bit 1
Bit 0
TREG[1]
TREG[0]
00 – 60°C, 01 – 80°C, 10 – 100°C, 11 –
120°C
Default: 120°C (11)
Misc Operation Control Register REG07 (default 01001011, or 4B)
BIT
DESCRIPTION
Force DPDM detection
Bit 7
DPDM_EN
0 – Not in D+/D– detection;
1 – Force D+/D– detection
Safety Timer Setting during Input DPM and Thermal Regulation
Bit 6
TMR2X_EN
0 – Safety timer not slowed by 2X during input DPM
or thermal regulation,
1 – Safety timer slowed by 2X during input DPM or
thermal regulation
Force BATFET Off
Bit 5
BATFET_Disable
0 – Allow Q4 turn on, 1 – Turn off Q4
Bit 4
Reserved
0 - Reserved
Bit 3
Reserved
1 - Reserved
Bit 2
Reserved
0 - Reserved
Bit 1
INT_MASK[1]
0 – No INT during CHRG_FAULT, 1 – INT on
CHRG_FAULT
Bit 0
INT_MASK[0]
0 – No INT during BAT_FAULT, 1 – INT on
BAT_FAULT
NOTE
Default: Not in D+/D– detection (0), Back to 0
after detection complete
Default: Safety timer slowed by 2X (1)
Default: Allow Q4 turn on(0)
Default: INT on CHRG_FAULT (1)
Default: INT on BAT_FAULT (1)
System Status Register REG08
BIT
DESCRIPTION
Bit 7
VBUS_STAT[1] 00 – Unknown (no input, or DPDM detection incomplete), 01 – USB host, 10 – Adapter port, 11 – OTG
Bit 6
VBUS_STAT[0]
Bit 5
Bit 4
CHRG_STAT[1] 00 – Not Charging, 01 – Pre-charge (<V_BATLOWV), 10 – Fast Charging, 11 – Charge Termination Done
CHRG_STAT[0]
Bit 3
DPM_STAT
0 – Not DPM, 1 – VINDPM or IINDPM
Bit 2
PG_STAT
0 – Not Power Good, 1 – Power Good
Bit 1
THERM_STAT 0 – Normal, 1 – In Thermal Regulation
Bit 0
VSYS_STAT 0 – Not in VSYSMIN regulation (BAT>VSYSMIN), 1 – In VSYSMIN regulation (BAT<VSYSMIN)
Fault Register REG09
BIT
Bit 7
WATCHDOG_FAULT
Bit 6
Reserved
Bit 5
CHRG_FAULT[1]
Bit 4
CHRG_FAULT[0]
Bit 3
BAT_FAULT
Bit 2
NTC_FAULT[2]
Bit 1
NTC_FAULT[1]
Bit 0
NTC_FAULT[0]
DESCRIPTION
0 – Normal, 1- Watchdog timer expiration
0 - Reserved
00 – Normal, 01 – Input fault (VBUS OVP or VBAT<VBUS<3.8V), 10 - Thermal shutdown,
11 – Charge Safety Timer Expiration
0 – Normal, 1 – BATOVP
000 – Normal, 101 – Cold, 110 – Hot
16
Submit Documentation Feedback
Product Folder Links: bq24195 bq24195L
Copyright © 2012, Texas Instruments Incorporated