SN74CB3T16210 Datasheet, PDF (10/14 Pages) Texas Instruments – 2.5-V/3.3-V LOW-VOLTAGE BUS SWITCH WITH 5-V-TOLERANT LEVEL SHIFTER

www.ti.com
PACKAGE OPTION ADDENDUM
19-May-2005
PACKAGING INFORMATION
Orderable Device
74CB3T16210DGGRE4
74CB3T16210DGVRE4
SN74CB3T16210DGG
SN74CB3T16210DGGR
SN74CB3T16210DGVR
SN74CB3T16210DL
SN74CB3T16210DLR
Status ⁽¹⁾
ACTIVE
Package
Type
TSSOP
Package
Drawing
DGG
ACTIVE TVSOP
DGV
PREVIEW TSSOP
DGG
ACTIVE TSSOP
DGG
ACTIVE TVSOP
DGV
PREVIEW SSOP
DL
PREVIEW SSOP
DL
Pins Package Eco Plan ⁽²⁾
Qty
48 2000
Pb-Free
(RoHS)
48 2000
Pb-Free
(RoHS)
48 40
Pb-Free
(RoHS)
48 2000
Pb-Free
(RoHS)
48 2000
Pb-Free
(RoHS)
48 25
TBD
48 1000
TBD
Lead/Ball Finish MSL Peak Temp ⁽³⁾
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-1-250C-UNLIM
CU NIPDAU Level-1-250C-UNLIM
Call TI
Call TI
Call TI
Call TI
(1) _{The marketing status values are defined as follows:}
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) _{Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check}
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3) _{MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder}
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1