TLV320AIC3204 Datasheet, PDF (1/159 Pages) Texas Instruments – Ultra Low Power Stereo Audio Codec

TLV320AIC3204
www.ti.com
Ultra Low Power Stereo Audio Codec
SLOS602A – SEPTEMBER 2008 – REVISED OCTOBER 2008
1 Introduction
1.1 Features
• Stereo Audio DAC with 100dB SNR
• 4.1mW Stereo 48ksps DAC Playback
• Stereo Audio ADC with 93dB SNR
• 6.1mW Stereo 48ksps ADC Record
• PowerTune™
• Extensive Signal Processing Options
• Six Single-Ended or 3 Fully-Differential Analog
Inputs
• Stereo Analog and Digital Microphone Inputs
• Stereo Headphone Outputs
• Stereo Line Outputs
• Very Low-Noise PGA
• Low Power Analog Bypass Mode
• Programmable Microphone Bias
• Programmable PLL
• Integrated LDO
• 5 mm x 5 mm 32-pin QFN Package
1.2 Applications
• Portable Navigation Devices (PND)
• Portable Media Player (PMP)
• Mobile Handsets
• Communication
• Portable Computing
1.3 Description
The TLV320AIC3204 (sometimes referred to as the
AIC3204) is a flexible, low-power, low-voltage stereo
audio codec with programmable inputs and outputs,
PowerTune capabilities, fixed predefined and
parameterizable signal processing blocks, integrated
PLL, integrated LDOs and flexible digital interfaces.
IN1_L
IN2_L
IN3_L
IN3_R
IN2_R
IN1_R
SPI_Select
Reset
MicBias
Ref
AGC
+
0…+47.5 dB
Left
ADC
tpl
ADC
´ Signal
Proc.
+
Gain Adj.
0.5 dB
steps
CM
-30...0 dB
DRC
Vol. Ctrl
-72...0dB
DAC
Signal
Proc.
´
Left
DAC
-6...+29dB
+
HPL
1dB steps
-6...+29dB
+
LOL
-30...0 dB
Data Interface
1dB steps
-6...+29dB
CM
0…
+
+47.5 dB
Right
ADC
Gain Adj.
ADC
´ tpr
Signal
Proc.
+
0.5 dB steps
AGC
+
LOR
1dB steps
DAC
Signal
Proc.
´
Right
DAC
-6...+29dB
+
HPR
DRC
Vol. Ctrl
-72...0dB
1dB steps
Mic
Bias
Ref
HPVdd
ALDO
DLDO
SPI / I2C
Control Block
PLL
Digital Interrupt Secondary Primary
Mic. Ctrl
I²S IF
I²S Interface
Supplies
Pin Muxing / Clock Routing
Figure 1-1. Simplified Block Diagram
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this document.
PowerTune is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2008, Texas Instruments Incorporated