THS3201 Datasheet, PDF (1/29 Pages) Texas Instruments – 1.8-GHz, LOW DISTORTION, CURRENT FEEDBACK AMPLIFIER

www.ti.com
D-8
DBV-5 DGN-8 ^DGK-8
THS3201
SLOS416A − JUNE 2003 − REVISED JANUARY 2004
1.8ĆGHz, LOW DISTORTION, CURRENT FEEDBACK AMPLIFIER
FEATURES
DESCRIPTION
D Unity Gain Bandwidth: 1.8 GHz
D High Slew Rate: 10500 V/µs
D Distortion at 100 MHz: (G = 10 V/V,
R_L = 100 Ω, 2-V_PP envelope)
− IMD₃: −80 dBc
− OIP₃: 41 dBm
D Noise Figure : 11 dB (G = 10 V/V,
R_G = 28 Ω, R_F = 255 Ω)
D Input Referred Noise (f > 10 MHz)
− Voltage Noise: 1.65 nV/√Hz
− Noninverting Current Noise: 13.4 pA/√Hz
− Inverting Current Noise: 20 pA/√Hz
D Output Current: +115/−100 mA
D Power Supply Voltage Range: ±3.3 V to ±7.5 V
APPLICATIONS
D Arbitrary Waveform Driver
D High-Resolution, High-Sampling Rate ADC
Drivers
D High-Resolution, High-Sampling Rate DAC
Output Buffers
D If Amplification for Wireless Communications
Applciations
D Broadcast Video and HDTV Line Drivers
The THS3201 is a wide-band, high-speed
current-feedback amplifier, designed to operate over a
wide supply range of ±3.3 V to ±7.5 V for todays high
performance applications.
The wide supply range combined with distortion as low as
−74 dBc at 10 MHz, plus an extremely high slew rate of
10500 V/µs makes the THS3201 ideally suited for arbitrary
waveform driver applications. The distortion performance
also enables driving high-resolution and high-sampling
rate ADCs. Moreover, the gain of +2 bandwidth of 850
MHz, combined with a 0.1 dB flatness of 380 MHz makes
the THS3201 ideal for broadcast video and HDTV
applications. The THS3201 also offers excellent
performance for IF amplification in wireless
communications systems by having IMD₃ performance of
−80 dBc, OIP₃ of 41 dBm, and a noise figure of 11 dB, all at
100 MHz with a gain +10 V/V, while driving a 2-V_PP
envelope into a 100-Ω load.
The THS3201 is offered in a 5-pin SOT−23, 8-pin SOIC,
and an 8-pin MSOP with PowerPAD packages.
RELATED DEVICES AND DESCRIPTIONS
THS3202 ±7.5-V 2-GHz Dual Low Distortion CFB Amplifier
THS3001 ±15-V 420-MHz Low Distortion CFB Amplifier
THS3061/2 ±15-V 300-MHz Low Distortion CFB Amplifier
THS3122 ±15-V Dual CFB Amplifier With 350 mA Drive
THS4271 ±7.5-V 1.4-GHz Low Distortion VFB Amplifier
Low-Noise, Low-Distortion, Wideband Application Circuit
50 Ω Source
50 Ω
VI
+7.5 V
49.9 Ω
+
THS3201
_
49.9 Ω
50 Ω
−7.5 V
768 Ω
768 Ω
NOTE: Power supply decoupling capacitors not shown
NONINVERTING SMALL SIGNAL
FREQUENCY RESPONSE
8
7
RF = 768 Ω
6
5
4
3
Gain = 2.
2
RL = 100 Ω,
1
VO = 0.2 VPP.
VS = ±7.5 V
0
100 k 1 M 10 M
100 M
1 G 10 G
f − Frequency − Hz
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products
conform to specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all parameters.
Copyright  2003 − 2004, Texas Instruments Incorporated