English
Language : 

OPA3690ID Datasheet, PDF (1/39 Pages) Texas Instruments – Triple, Wideband, Voltage-Feedback OPERATIONAL AMPLIFIER with Disable
OPA3690
www.ti.com
SBOS237G – MARCH 2002 – REVISED MARCH 2010
Triple, Wideband, Voltage-Feedback
OPERATIONAL AMPLIFIER with Disable
Check for Samples: OPA3690
FEATURES
1
•2 FLEXIBLE SUPPLY RANGE:
+5V to +12V Single Supply
±2.5V to ±6V Dual Supply
• WIDEBAND +5V OPERATION: 220MHz (G = 2)
• HIGH OUTPUT CURRENT: 190mA
• OUTPUT VOLTAGE SWING: ±4.0V
• HIGH SLEW RATE: 1800V/ms
• LOW SUPPLY CURRENT: 5.5mA/ch
• LOW DISABLE CURRENT: 100mA/ch
APPLICATIONS
• VIDEO LINE DRIVING
• HIGH-SPEED IMAGING CHANNELS
• ADC BUFFERS
• PORTABLE INSTRUMENTS
• TRANSIMPEDANCE AMPLIFIERS
• ACTIVE FILTERS
DESCRIPTION
The OPA3690 represents a major step forward in
unity-gain stable, voltage-feedback op amps. A new
internal architecture provides slew rate and full-power
bandwidth previously found only in wideband,
current-feedback op amps. A new output stage
architecture delivers high currents with a minimal
headroom requirement. These give exceptional
single-supply operation. Using a single +5V supply,
the OPA3690 can deliver a 1V to 4V output swing
with over 120mA drive current and 150MHz
bandwidth. This combination of features makes the
OPA3690 an ideal RGB line driver or single-supply
Analog-to-Digital Converter (ADC) input driver.
The low 5.5mA/ch supply current of the OPA3690 is
precisely trimmed at +25°C. This trim, along with low
temperature drift, provides lower maximum supply
current than competing products. System power may
be reduced further using the optional disable control
pin. Leaving this disable pin open, or holding it HIGH,
will operate the OPA3690 normally. If pulled LOW,
the OPA3690 supply current drops to less than
200mA/ch while the output goes to a high-impedance
state. This feature may be used for power savings.
OPA3690 RELATED PRODUCTS
SINGLES
DUALS
TRIPLES
Voltage-Feedback
OPA690
OPA2690
—
Current-Feedback
OPA691
OPA2691 OPA3691
Fixed Gain
OPA692
—
OPA3692
Buffered Analog Delay Line
1pF
1pF
49.9W
VIN
1/3
OPA3690
49.9W
249W
249W
R
75.0W
1/3
49.9W OPA3690
249W
249W
R
75.0W
1/3
49.9W OPA3690
VOUT
C
330pF
C
330pF
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2002–2010, Texas Instruments Incorporated