|
DAC3283_15 Datasheet, PDF (1/67 Pages) Texas Instruments – DAC3283 Dual-Channel, 16-Bit, 800 MSPS, Digital-to-Analog Converter (DAC) | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DAC3283
SLAS693C â MARCH 2010 â REVISED MARCH 2015
DAC3283 Dual-Channel, 16-Bit, 800 MSPS, Digital-to-Analog Converter (DAC)
1 Features
â¢1 Dual, 16-Bit, 800 MSPS DACs
⢠8-Bit Input LVDS Data Bus
â Byte-Wide Interleaved Data Load
â 8 Sample Input FIFO
â Optional Data Pattern Checker
⢠Multi-DAC Synchronization
⢠Selectable 2x-4x Interpolation Filters
â Stop-Band Attenuation > 85 dB
⢠Fs/2 and ± Fs/4 Coarse Mixer
⢠Digital Quadrature Modulator Correction
â Gain, Phase and Offset Correction
⢠Temperature Sensor
⢠3- or 4-Wire Serial Control Interface
⢠On-Chip 1.2-V Reference
⢠Differential Scalable Output: 2 to 20 mA
⢠Single-Carrier TM1 WCDMA ACLR: 82 dBc at
fOUT = 122.88 MHz
⢠Low Power: 1.3 W at 800 MSPS
⢠Space Saving Package: 48-pin 7Ã7mm QFN
2 Applications
⢠Cellular Base Stations
⢠Diversity Transmit
⢠Wideband Communications
⢠Digital Synthesis
3 Description
The DAC3283 is a dual-channel 16-bit 800 MSPS
digital-to-analog converter (DAC) with an 8-bit LVDS
input data bus with on-chip termination, optional 2x-
4x interpolation filters, digital IQ compensation and
internal voltage reference. The DAC3283 offers
superior linearity, noise and crosstalk performance.
Input data can be interpolated by 2x or 4x through
on-chip interpolating FIR filters with over 85 dB of
stop-band attenuation. Multiple DAC3283 devices can
be fully synchronized.
The DAC3283 allows either a complex or real output.
An optional coarse mixer in complex mode provides
frequency upconversion and the dual DAC output
produces a complex Hilbert Transform pair. The
digital IQ compensation feature allows optimization of
phase, gain and offset to maximize sideband rejection
and minimize LO feed-through of an external
quadrature modulator performing the final single
sideband RF up-conversion.
The DAC3283 is characterized for operation over the
entire industrial temperature range of â40°C to 85°C
and is available in a 48-pin 7Ã7mm QFN package.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DAC3283
VQFN (48)
7.00 mm à 7.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Simplified Schematic
DAC3283
16-bit DAC
xN
RF
16-bit DAC
xN
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |