CC110L Datasheet, PDF (1/85 Pages) Texas Instruments – Value Line Transceiver

Value Line Transceiver
Applications
Ultra low-power wireless applications
operating in the 315/433/868/915 MHz
ISM/SRD bands
Wireless alarm and security systems
Key Features
RF Performance
Programmable output power up to +12dBm
Receive sensitivity down to −116 dBm at
0.6 kbps
Programmable data rate from 0.6 to
600 kbps
Frequency bands: 300 - 348 MHz,
387 - 464 MHz, and 779 - 928 MHz
2-FSK, 4-FSK, GFSK, and OOK supported
Digital Features
Flexible support for packet oriented
systems
On-chip support for sync word detection,
flexible packet length, and automatic CRC
calculation
Low-Power Features
200 nA sleep mode current consumption
Fast start-up time; 240 μs from sleep to RX
or TX mode
64-byte RX and TX FIFO
Product Description
The CC110L is a cost optimized sub-1 GHz RF
transceiver for the 300 - 348 MHz,
387 - 464 MHz, and 779 - 928 MHz frequency
bands. The circuit is based on the popular
CC1101 RF transceiver, and RF performance
characteristics are identical. Two CC110L
transceivers together enable a low cost
bidirectional RF link.
The RF transceiver is integrated with a highly
configurable baseband modem. The modem
supports various modulation formats and has
a configurable data rate up to 600 kbps.
CC110L provides extensive hardware support for
packet handling, data buffering and burst
transmissions.
The main operating parameters and the 64-
byte receive and transmit FIFOs of CC110L can
CC110L
Industrial monitoring and control
Remote Controls
Toys
Home and building automation
Improved Range using CC1190
The CC1190 [13] is a range extender for
850 - 950 MHz and is an ideal fit for CC110L
to enhance RF performance
High sensitivity
o –118 dBm at 1.2 kBaud, 868 MHz,
1% packet error rate
o –120 dBm at 1.2 kBaud, 915 MHz,
1% packet error rate
+20 dBm output power at 868 MHz
+26 dBm output power at 915 MHz
General
Few external components; Completely on-
chip frequency synthesizer, no external
filters or RF switch needed
Green package: RoHS compliant and no
antimony or bromine
Small size (QLP 4x4 mm package, 20 pins)
Suited for systems targeting compliance
with EN 300 220 V2.3.1 (Europe) and FCC
CFR Part 15 (US)
Support for asynchronous and
synchronous serial transmit mode for
backwards compatibility with existing radio
communication protocols
be controlled via an SPI interface. In a typical
system, the CC110L will be used together with a
microcontroller and a few additional passive
components.
This product shall not be used in any of the following products or systems without prior
express written permission from Texas Instruments:
implantable cardiac rhythm management systems, including without limitation pacemakers,
defibrillators and cardiac resynchronization devices,
external cardiac rhythm management systems that communicate directly with one or more
implantable medical devices; or
other devices used to monitor or treat cardiac function, including without limitation pressure
sensors, biochemical sensors and neurostimulators.
Please contact [e-mail] if your application might fall within the
category described above.
SWRS109A
Page 1 of 78