BQ27505-J4 Datasheet, PDF (1/38 Pages) Texas Instruments – System-Side Impedance Track™ Fuel Gauge

www.ti.com
System-Side Impedance Track™ Fuel Gauge
bq27505-J4
SLVSA40 – DECEMBER 2009
1 INTRODUCTION
1.1 FEATURES
•123 Battery Fuel Gauge for 1-Series Li-Ion
Applications
• Resides on System Main Board
– Works With Embedded or Removable
Battery Packs
• Microcontroller Peripheral Provides:
– Accurate Battery Fuel Gauging
– Internal Temperature Sensor for Battery
Temperature Reporting
– Battery Low Interrupt Warning
– Battery Insertion Indicator
– Configurable Level of State of Charge (SOC)
Interrupts
– State of Health Indicator
– 96 Bytes of Non-Volatile Scratch-Pad FLASH
• Battery Fuel Gauge Based on Patented
Impedance Track™ Technology
– Models the Battery Discharge Curve for
Accurate Time-to-Empty Predictions
– Automatically Adjusts for Battery Aging,
Battery Self-Discharge, and
Temperature/Rate Inefficiencies
– Low-Value Sense Resistor (10 mΩ or Less)
• 400-kHz I²C™ Interface for Connection to
System Microcontroller Port
• In a 12-Pin NanoFree™ (CSP) Packaging
1.2 APPLICATIONS
• Smartphones and PDAs
• Digital Still and Video Cameras
• Handheld Terminals
• MP3 or Multimedia Players
1.3 DESCRIPTION
The Texas Instruments bq27505-J4
system-side Li-Ion battery fuel gauge is a
microcontroller peripheral that provides fuel
gauging for single-cell Li-Ion battery packs.
The device requires little system
micro-controller firmware development. The
bq27505-J4 resides on the system’s main
board and manages an embedded battery
(nonremovable) or a removable battery pack.
The bq27505-J4 uses the patented Impedance
Track algorithm for fuel gauging, and provides
information such as remaining battery capacity
(mAh), state-of-charge (%), run-time to empty
(min), battery voltage (mV), temperature (°C)
and state of health(%).
Battery fuel gauging with the bq27505-J4
requires only PACK+ (P+), PACK– (P–), and
Thermistor (T) connections to a removable
battery pack or embedded battery circuit. The
CSP option is a 12-ball package in the
dimensions of 2.43mm × 1.96mm with 0.5mm
lead pitch. It is ideal for space constrained
applications.
Power
Management
Controller
Host System
LDO
VCC
Battery
Low
Voltage
Sense
I2C
DATA
Temp
Sense
bq27505
BAT_GD
SOC_INT
Current
Sense
PACK+
T
PACK-
Single Cell Li-lon
Battery Pack
PROTECTION
IC
FETs
CHG
DSG
Figure 1-1. Typical Application
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Impedance Track, NanoFree are trademarks of Texas Instruments.
2
I2C is a trademark of Philips Electronics.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009, Texas Instruments Incorporated