BQ27210 Datasheet, PDF (1/30 Pages) Texas Instruments – Li-Ion AND Li-Pol BATTERY GAS GAUGE IC FOR PORTABLE APPLICATIONS (bqJUNIOR)

bq27010, bq27210
www.ti.com
SLUS707B – APRIL 2006 – REVISED JANUARY 2007
Li-Ion AND Li-Pol BATTERY GAS GAUGE IC FOR PORTABLE APPLICATIONS
(bqJUNIOR)
FEATURES
• HDQ (bq27010) or I²C (bq27210)
Communication
• Reports Accurate Time-to-Empty At Both
Measured and Host-Requested Load Values
• Reports Available Capacity Compensated for
Discharge Rate, Temperature, and Age
• End-of-Discharge Voltage Compensated for
Discharge Rate and Temperature
• Automatic Capacity Reduction with Age
• Reports Temperature, Voltage, and Current
• High Accuracy Charge and Discharge Current
Integration with Automatic Offset Calibration
• Requires No User Calibration
• Programmable Input/Output Port
• Internal User EEPROM Configuration Memory
• Uploadable Coefficients Allows Host-Side Use
with Multiple Pack Characteristics
• Stable Oscillator Without External
Components
• Dynamic End-of-Discharge Detection Delay to
Allow Use in a High-Dynamic Load
Environment
• Automatic Sleep Mode When Communication
Lines are Low
• Available in a Small 3 mm x 4 mm QFN
Package
• Five Low-Power Operating Modes
– Active: < 90 µA
– Sleep: < 2.5 µA
– Ship: < 2 µA (bq27010 only)
– Hibernate: < 1.5 µA
– Data Retention: < 20 nA
APPLICATIONS
• PDA
• Smart Phones
• MP3 Players
• Digital Cameras
• Internet Appliances
• Handheld Devices
DESCRIPTION
The bqJUNIOR™ series are highly accurate
stand-alone single-cell Li-Ion and Li-Pol battery
capacity monitoring and reporting devices targeted at
space-limited, portable applications. The IC monitors
a voltage drop across a small current sense resistor
connected in series with the battery to determine
charge and discharge activity of the battery.
Compensations for battery age, temperature,
self-discharge, and discharge rate are applied to the
capacity measurments to provide available
time-to-empty information across a wide range of
operating conditions. Battery capacity is
automatically recalibrated, or learned, in the course
of a discharge cycle from full to empty. Internal
registers include current, capacity, time-to-empty,
state-of-charge, cell temperature and voltage, status,
and more.
The bqJUNIOR can operate directly from single-cell
Li-Ion and Li-Pol batteries and communicates to the
system over a HDQ one-wire or I²C serial interface.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
bqJUNIOR is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2007, Texas Instruments Incorporated