AMC1200_15 Datasheet, PDF (1/31 Pages) Texas Instruments – AMC1200/B Fully-Differential Isolation Amplifier

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
AMC1200, AMC1200B
SBAS542D – APRIL 2011 – REVISED JULY 2015
AMC1200/B Fully-Differential Isolation Amplifier
1 Features
•1 ±250-mV Input Voltage Range Optimized for
Shunt Resistors
• Very Low Nonlinearity: 0.075% Maximum at 5 V
• Low Offset Error: 1.5 mV Maximum
• Low Noise: 3.1 mV_RMS Typical
• Low High-Side Supply Current:
8 mA Maximum at 5 V
• Input Bandwidth: 60 kHz Minimum
• Fixed Gain: 8 (0.5% accuracy)
• High Common Mode Rejection Ratio: 108 dB
• 3.3-V Operation on Low-Side
• Certified Galvanic Isolation:
– UL1577 and VDE V 0884-10 Approved
– Isolation Voltage: 4250 V_PEAK (AMC1200B)
– Working Voltage: 1200 V_PEAK
– Transient Immunity: 10 kV/µs Minimum
• Typical 10-Year Lifespan at Rated Working
Voltage (see Application Report SLLA197)
• Fully Specified Over the Extended Industrial
Temperature Range
2 Applications
• Shunt Resistor Based Current Sensing in:
– Motor Control
– Green Energy
– Frequency Inverters
– Uninterruptible Power Supplies
3 Description
The AMC1200 and AMC1200B are precision isolation
amplifiers with an output separated from the input
circuitry by a silicon dioxide (SiO₂) barrier that is
highly resistant to magnetic interference. This barrier
has been certified to provide galvanic isolation of up
to 4250 V_PEAK (AMC1200B) or 4000 V_PEAK
(AMC1200) according to UL1577 and VDE V 0884-
10. Used in conjunction with isolated power supplies,
these devices prevent noise currents on a high
common mode voltage line from entering the local
ground and interfering with or damaging sensitive
circuitry.
The input of the AMC1200 or AMC1200B is optimized
for direct connection to shunt resistors or other low
voltage level signal sources. The excellent
performance of the device supports accurate current
control resulting in system-level power saving and,
especially in motor-control applications, lower torque
ripple. The common mode voltage of the output
signal is automatically adjusted to either the 3-V or
5-V low-side supply.
The AMC1200 and AMC1200B are fully specified
over the extended industrial temperature range of
–40°C to 105°C and are available in a wide-body
SOIC-8 package (DWV) and a gullwing-8 package
(DUB).
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
AMC1200,
AMC1200B
SOP (8)
SOIC (8)
9.50 mm × 6.57 mm
5.85 mm × 7.50 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Schematic
VDD1
VDD2
5V
VINP
2.55 V
2V
VOUTP
0V
250 mV
VINN
3.3 V
VOUTN
1.29 V
2V
GND1
GND2
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.