ADS54T01_15 Datasheet, PDF (1/47 Pages) Texas Instruments – Single 12-Bit 750Msps Receiver and Feedback IC

ADS54T01
www.ti.com
SLAS918A – DECEMBER 2012 – REVISED JANUARY 2014
Single 12-Bit 750Msps Receiver and Feedback IC
Check for Samples: ADS54T01
FEATURES
1
• Single Channel
• 12-Bit Resolution
• Maximum Clock Rate: 750 Msps
• Low Swing Fullscale Input: 1.0 Vpp
• Analog Input Buffer with High Impedance Input
• Input Bandwidth (3dB): >1.2GHz
• Data Output Interface: DDR LVDS
• 196-Pin BGA Package (12x12mm)
• Power Dissipation: 1.2W
• Performance at f_in = 230 MHz IF
– SNR: 60.7 dBFS
– SFDR: 73 dBc
• Performance at f_in = 700 MHz IF
– SNR: 58.6 dBFS
– SFDR: 64 dBc
• Receive Mode: 2x Decimation with Low Pass
or High Pass Filter
• Feedback Mode: Burst Mode Output for Full
Bandwidth DPD Feedback
APPLICATIONS
• Telecommunications Receiver
• Power Amplifier Linearization
DESCRIPTION
The ADS54T01 is a high linearity single channel 12-
bit, 750 MSPS analog-to-digital converter (ADC)
easing front end filter design for wide bandwidth
receivers. The analog input buffer isolates the internal
switching of the on-chip track-and-hold from
disturbing the signal source as well as providing a
high-impedance input.
Two output modes are available for the output data –
it can be decimated by two or the data can be output
in burst mode. The burst mode output is designed
specifically for DPD feedback applications where high
resolution output data is available for a short period of
time. Designed for high SFDR, the ADC has low-
noise performance and outstanding spurious-free
dynamic range over a large input-frequency range.
The device is available in a 196pin BGA package and
is specified over the full industrial temperature range
(–40°C to 85°C).
INA
CLKIN
SYNC
Clk
Buffer
12bit
750Msps
Digital Block
Burst Mode
2x Decimation
DA[11:0]
DACLK
TRIGGER
Device Part No.
ADS54T02
ADS54T01
ADS54T04
Number of
Channels
2
1
2
Speed Grade
750 Msps
750 Msps
500 Msps
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012–2014, Texas Instruments Incorporated