DRS24D25 Datasheet, PDF (1/4 Pages) Teledyne Technologies Incorporated – Single Output to 30A 510 Vac DIN-Rail Solid-State Relay with Diagnostics

Part Number
DRS24D25
DRS48D25
DRS48D30
Description
25A, 280 Vac
25A, 510 Vac
30A, 510 Vac
Part Number Explanation
DRS
24
D
25
Series
Switch Type²
Line Voltage¹ Output Current - Amps
NOTES
1) Line Voltage (nominal): 24 = 240 Vac, 48 = 480 Vac
2) Switch Type: D = Zero-cross turn-on
MECHANICAL SPECIFICATION
Figure 1 — DRS relay; dimensions in inches (mm)
TYPICAL APPLICATION
400 Vac 60Hz
Protection
–
Output
Status
+
diag
SSR
NEW Series DRS
Single Output to 30A 510 Vac
DIN-Rail Solid-State Relay with Diagnostics
FEATURES/BENEFITS
• Easy mounting and dismounting on DIN rail
without any tools or directly mountable on panel
• Diagnostics offer control and output status
• Tight zero-cross window for low EMI
• 50A back-to-back thyristors
• LEDs for visual diagnostics
• Switch ON in case of overvoltage (DRS24D25)
• Large control range
DESCRIPTION
The Series DRS single-phase DIN-rail relays with
diagnostics are designed for all types of loads. The
relays utilize optical isolation to protect the control
from load transients. DRS relays have an integral heat
sink and can be mounted and dismounted onto a DIN
rail without any tools. The relays may also be panel
mounted.
All relays offer a control LED and output LED for visual
diagnostics. The DRS provides control and output
transient suppression. A normally closed status output
signal is provided for system diagnostics. The output
will turn on for a short time to clamp high voltage
surges.
APPLICATIONS
• Heating control
• Motor control
• Industrial process control
APPROVALS
Series DRS relays are pending UL recognition.
+
Input
Control
–
Load
Figure 2 — DRS relay (See Note 4)
© 2003 TELEDYNE RELAYS
[phone] • www.teledynerelays.com
DRS 1
DRS\032003\Q1