408-4328 Datasheet, PDF (3/4 Pages) TE Connectivity Ltd – Reasons for reissue are provided in Section 7, REVISION SUMMARY.

408- 4328
5. MAINTENANCE AND INSPECTION
The seating tool is assembled and inspected before
shipment. TE Connectivity recommends that the tool
be inspected immediately upon arrival at your facility
to ensure that the tool has not been damaged during
shipment, and that the tool conforms to the
dimensions provided in Figure 3.
5.1. Daily Maintenance
TE recommends that each operator be made aware
of, and responsible for, the following steps of daily
maintenance:
1. Remove dust, moisture, and contaminants with
a clean, soft brush or a lint--free cloth. Do NOT use
objects that could damage the tool components.
2. When the tool is not in use, store it in a clean,
dry area.
5.2. Periodic Inspection
Regular inspections should be performed by quality
control personnel. A record of scheduled inspections
should remain with the tooling or be supplied to
supervisory personnel responsible for the tool.
Inspection frequency should be based on amount of
use, working conditions, operator training and skill,
and established standards.
6. REPLACEMENT AND REPAIR
Refer to Figure 3 for customer--replaceable parts. A
complete inventory should be stocked to prevent
production downtime when replacement of parts is
necessary. Order replacement parts through your TE
representative, or call 1--800--526--5142, or send a
facsimile of your purchase order to 717--986--7605, or
write to:
CUSTOMER SERVICE (038--035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105--3608
For customer repair service, please contact a TE
representative at 1--800--526--5136.
4
3
Dim. A
38.1 mm
[1.50 in.]
1
38.02 mm
[1.497 in.]
2
ITEM
1
2
3
4
Rev C
DIMENSION A (Length mm [in.]) FOR SEATING TOOL
1320142- 1
1320142- 2
95.3 [3.75]
50.8 [2.00]
REPLACEMENT PARTS
PART NUMBER FOR ASSEMBLY
1320142- 1
1320142- 2
DESCRIPTION
1--21002--3
—
SCREW, Button Head Cap 4--40
—
1--21002--3
SCREW, Button Head Cap 4--40
1320143--1
1320143--2
BLADE, Insertion
2--21012--8
—
SCREW, Socket Set 6--32
—
2--21012--8
SCREW, Socket Set 6--32
354698--2
354699--1
ADAPTER
Figure 3 (cont’d)
QTY PER
ASSEMBLY
2
4
2
5
10
1
3 of 4