408-10154 Datasheet, PDF (2/3 Pages) TE Connectivity Ltd – These connectors consist of a plug and a receptacle

NOTE
i
Pull back gently on the wires to ensure they have
latched fully into the connectors.
Wire Bottomed in 
Connector Assembly
408-10154
5. Dress the wire 180° to complete the process. See
Figure 6.
Wire Dressedin Slots at 180°
Figure 3
3. Pull the wire down through the slot in the strain-
relief. See Figure 4.
Figure 6
6. Apply optional approved flammability rated tape
or clamp to organize the wires. See Figure 7.
Figure 4
4. Rotate the wire 90°. See Figure 5.
Rev D
Figure 5
Optional Tape or Clamp
May Be Applied
Figure 7
4. CONNECTOR MATING
Align the polarized mating faces of the connectors,
and push the connectors together. DO NOT force the
connectors to mate. When fully mated, the connectors
must appear bottomed with each other and flush at the
point of engagement. An audible and tactile "click" will
be heard and felt. See Figure 8.
2 of 3