408-8848 Datasheet, PDF (1/6 Pages) TE Connectivity Ltd – Reasons for reissue are provided in Section 8, REVISION SUMMARY.

Compliant
Pin Contact
Small Form-Factor Pluggable
(SFP) Cage Assembly
Seating Tool Kits
Back
Instruction Sheet
408-8848
12 AUG 15 Rev F
2 x 1 Seating Tool 1490197-2
(Shown) Bottomed on Cage
Assembly
Standard Profile 2 x 1 SFP
Cage Assembly with Press-Fit
Connector 1658391-1 (Shown)
2 x 1 Wall Support
(For Clarity), Not
Shown Installed)
SEATING TOOL KIT
Flat Rock Seating Tool for
Caged Assembly with Heat
Sinks Supplied by Customer
SFP PRODUCT
CONFIGURATION
DESCRIPTION
1725609-3▪
1725609-1▪
1725609-2▪
1x2
1x4
Cage Assembly Using Surface Mount Connector
(Supplied as Separate Parts)
1x6
1490197-2
1490197-1
1804875-1
2x1
Standard Profile
2x4
Cage Assembly With Press-Fit Connector
2x6
(Supplied as One Unit)
1725616-1
1725618-1
1804419-1
2x1
Low-Profile
2x4
Cage Assembly With Press-Fit Connector
2x6
(Supplied as One Unit)
2018887-1
2018887-2
2018887-3
1x4
1x6
Cage Assembly W/Heat Sinks Using Surface
Mount Connector (Supplied as One Unit)
1x2
1725761-1
1725761-2
1x4
Cage Assembly with Press-Fit Connector
1x6
(Supplied as one Unit)
▪These seating tool kits cannot be used to seat the connector or single port cage assembly.
1. INTRODUCTION
Figure 1
PC Board Support
Fixture (Ref)
APPLICATION
SPECIFICATION
114-13120
114-13103
114-13103
114-13120
114-13121
SFP cage assembly seating tool kits listed in Figure 1 are used to seat SFP products described in Figure 1
onto the pc board. The cage assemblies and press-fit connectors contain compliant pin contacts to allow
solderless pc board installation. Read these instructions thoroughly before using the seating tool kit.
NOTE
Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.
Reasons for reissue are provided in Section 8, REVISION SUMMARY.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
1 of 6