108-2086 Datasheet, PDF (1/6 Pages) TE Connectivity Ltd – When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.

Product
Specification
108-2086
07 May 12 Rev F
.187 and .250 Series AMPLIVAR* FASTON* Flag Receptacle
1. SCOPE
1.1. Content
This specification covers performance, tests and quality requirements for the .187 and .250 Series
AMPLIVAR* FASTON* Flag Receptacles.
1.2. Qualification
When tests are performed on the subject product line, procedures specified in Figure 1 shall be used.
All inspections shall be performed using the applicable inspection plan and product drawing.
1.3. Qualification Test Results
Successful qualification testing on the .187 series product line was completed on 31Mar03. Additional
testing was completed on 05Oct04. Successful qualification for the .250 series product line was
completed on 08Mar12. The Qualification Test Report number for this testing is 501-552. This
documentation is on file at and available from Engineering Practices and Standards (EPS).
2. APPLICABLE DOCUMENTS
The following documents form a part of this specification to the extent specified herein. Unless
otherwise specified, the latest edition of the document applies. In the event of conflict between the
requirements of this specification and the product drawing, the product drawing shall take precedence.
In the event of conflict between the requirements of this specification and the referenced documents,
this specification shall take precedence.
2.1. Documents
● 109-197:
AMP Test Specifications vs EIA and IEC Test Methods
● 114-2152:
AMPLIVAR FASTON Flag Receptacles
● 501-552:
.187 and .250 Series AMPLIVAR* FASTON* Flag Receptacle
2.2. Commercial Standards
● EIA-364: Electrical Connector/Socket Test Procedures Including Environmental Classifications
● UL-310: Electrical Quick-Connect Terminals
3. REQUIREMENTS
3.1. Design and Construction
Product shall be of the design, construction and physical dimensions specified on the applicable
product drawing.
3.2. Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
3.3. Ratings
● Voltage: 240 volts AC
● Current: See Figure 4 for applicable current carrying capability
● Temperature: -40 to 105°C
3.4. Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
©2012 Tyco Electronics Corporation, a TE Connectivity Ltd. company
All Rights Reserved
| Indicates Change
This controlled document is subject to change.
For latest revision and Regional Customer Service, visit our website at www.te.com
PRODUCT INFORMATION 1-800-522-6752
*Trademark. TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or company names may be trademarks of their respective owners.
1 of 6