ICF12005A007V Datasheet, PDF (9/16 Pages) TDK Electronics – ICF Series – Non-isolated SMT Power Module

Advance Data Sheet: iCF Series – Non-isolated SMT Power Module
Electrical Characteristics:
Vert = 5A/div
Horz =20ms/div
Vert = 5mV/div
Horz = 2us/div
Vo=1.8V Typical Output Ripple at nominal Input voltage and
full load at Ta=25 degrees
CH2 = 0.5V/div
CH3 = 2V/div
Horz = 1ms/div
Typical Output Short Circuit Current – CH4, green
To be provided in future revision
Vert = 20mV/div
Horz = 2us/div
Vo=1.8V Typical startup characteristic from on/off at full load.
Upper trace - output voltage, lower trace – on/off signal
Vo=1.8V Typical Input Ripple at nominal Input Voltage and full
load at Ta=25 degrees. Input capacitors 2 x 22uF ceramic
CH1 = 50mV/div
CH2 = 1A/div
CH1 = 50mV/div
CH2 = 1A/div
Horz = 50us/div
Horz = 50us/div
Vo=1.8V Typical output voltage transient response to load step
from 50% to 100% of full load with output current slew rate of
10A/uS. (Cext = 2x22uF ceramic capacitor)
Vo=3.3V Typical output voltage transient response to load step
from 50% to 100% of full load with output current slew rate of
10A/uS. (Cext = 2x22uF ceramic capacitor)
©2010 TDK Innoveta Inc.
iCF12_3A_Full_Datasheet_091010.doc 9/10/2010 rev 1.1
℡ [phone]
9/16